Specifications
REV.-B
3.2.5.6 Removing and Disassembling the FRAME, MAIN, RIGHT
1. Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
2. Remove the PLATEN from the PRINTER MECHANISM (see Section 3.2.5.5).
3. Remove the MOTOR, CR from the FRAME, MAIN, BASE (see Section 3.2.5.1).
4. Remove the two CBS(C)(P) (M3 X 10) screws that hold the FRAME, MAIN, RIGHT to the FRAME, MAIN,
BASE. Remove the FRAME, MAIN, RIGHT from the FRAME, MAIN, BASE.
5. Remove the following items from the FRAME, MAIN, RIGHT in the specified order: MOTOR, PF (see
Section
3.2.5.2),
CAM, CLUTCH, TRACTOR, COMBINATION GEAR,
8.5,30,
SPUR GEAR, PLAIN
WASHER, COMPRESSION SPRING 200, and SPUR GEAR, 16.
CWW)
(M3 X 10)
Screw
FRAME, MAIN, RIGHT
SPUR GEAR, 16
COMPRESSION SPRING, 200
PLAIN WASHER
,SPUR
GEAR, 40
MOTOR, PF
COMBINATION GEAR, 8.5,
CAM, CLUTCH, TRACTOR
w
I
Figure 3-17. Disassembling the FRAME, MAIN, RIGHT
I
I
Point to Note for Assembly
When installing the PLAIN WASHER, insert it from the front in the direction indicated by the mark.
PLAIN WASHER
Mark Side
SPRING, 200
Figure 3-18. Direction for Inserting the PLAIN WASHER
3-14