Specifications

REV.-B
3.2.1 Changing the Printhead
1. Remove the FRAME ASSY., SHEET GUIDE.
2. Remove the COVER ASSY., EJECT.
FRAME ASSY., SHEET GUIDE
COVER ASSY., EJECT
(This illustration shows the LQ-570,
an 80column printer. The difference
I
between the LQ-570 and LQ-1070 is in
carriage width only.)
Figure 3-2. Removing the FRAME ASSY., SHEET GUIDE and the COVER ASSY., EJECT
I
3. Release the two levers that hold the printhead to the carriage. Lift out the printhead.
4. Remove the two FFCs (CABLE, HEAD, FRONT (,REAR)) from the printhead.
CAB1
Figure 3-3. Removing the Printhead