Service manual

Disassembly and Assembly

Rev. A

4. Remove 3 screws (CBB, 3X12) and 2 screws (CBB, 4X2) securing the upper housing to the lower

housing.

5. Insert the tweezers into the cutouts at the bottom of the upper housing to release the hooks fixing the

upper housing to the lower housing. Then remove the upper housing.

;

After replacing the upper housing or printer cover, be sure to attach the label such as the

CAUTION label to the specified position.

WORK POINT

Screw (CBB 3X12)

Screws (CBB 4X20)

Printer Cover

Tractor Unit

Rear Sheet Guide

Control Panel

Upper Housing

Hooks Fixing the Lower Housing

Release Lever

Knob

Knob Sheet

Screws (CBB 3X12)

Lower Housing

Figure 3-4. Upper Housing Removal