User`s manual

3-16
The cursor moves to the hold time:
4
Sometimes, you may want to change an entry after you have
pressed
ENTER
. To move back to the previous entry, you press the
BACK
key. The cursor is now at the hold time. Press
BACK
to move
the cursor back to the temperature:
5
Now press
ENTER
to move the cursor forward again to the hold
time.
6
For this example, we will not change the default hold time. Press
ENTER
to accept 0:30 seconds for the hold time.
The display for Setpoint #2 appears
Setpt #1 Ramp 0:00
96.0C Hold 0:30
Back
Press
To m o ve
the cursor
back to the
previous
parameter
Setpt $1 Ramp 0:00
94.0C Hold 0:30
Setpt #2 Ramp 0:00
55.0C Hold 0:30