User`s manual

2-15
Summary of Configuration Parameters
Configuration
E
DIT-PRINT
This display lets you edit or print the configuration
parameters.
Press ENTER to select EDIT. The first
configuration screen, used to set the time and
date, is displayed.
Time HH
:MM
Date MM/DD/YY
Set the time in hours and minutes (HH:MM), and
the date in month, day, and year (MM/DD/YY).
Press STEP to move to the next display.
Runtime printer OFF
Runtime beeper ON
To configure the instrument for use with a printer,
press the OPTION key to change OFF to ON,
then press ENTER.
To turn the run-time beeper off, press the OPTION
key to change ON to OFF, then press ENTER.
Press STEP to move to the next display. Or, press
BACK to move to the previous display.
Pause time out limit
xx:xx
Set the maximum amount of time that a program
can pause before it is aborted. (This pertains only
to the keypad pause.) The default value is 10
minutes.
Press
STEP
to move to the next display. Or, press
BACK
to move to the previous display.
Allowed setpt error
x.x
C
Set the number of degrees the actual sample
temperature may vary before the reading is noted
in the History file as an error. The default value is
2.0 degrees C.
Press STEP to move to the next display. Or, press
BACK to move to the previous display.