User`s manual

2-13
The following display appears:
This display is used to set the time and date.
5
To set the time, press the appropriate numeric keys for hours and
minutes (HH:MM), then press
ENTER
. The software will place the
colon for you. Press
ENTER
after making each entry.
6
To set the date, press the appropriate numeric keys for month, day
and year (MM/DD/YY), then press
ENTER
. The software will
separate the numbers for you.
7
Press
STEP
.
The following display appears:
This display lets you turn the run-time printer mode and the
run-time beeper on or off. When the run-time printer mode is on,
you can print run-time data. When the run-time beeper is on, a
beeper will sound at the end of each setpoint in a run.
8
Press the
OPTION
key to toggle the OFF on the top line of the
display to ON, then press
ENTER.
The instrument is now
configured for a printer.
9
If you don't want to hear a beeper sound at the end of each
setpoint, press the
OPTION
key to toggle the ON on the bottom line
of the display to OFF, then press
ENTER.
10
Press
STOP
to return to the Utilities menu. Press
STOP
again to
return to the main menu.
Time HH:MM
Date MM/DD/YY
Runtime printer OFF
Runtime beeper ON