User`s manual

7-36
Selecting the Diagnostic Tests
There are two ways to select a diagnostic test:
♦
You can enter the number of the test you want to run
or
♦
You can use the
STEP
key to scroll forward through the test
displays and the
BACK
key to scroll backward through the test
displays.
To select a diagnostic test by entering its test number:
1
Select DIAG on the Utilities menu as described on page 7-3.
The following display appears:
2
Press the numeric key that corresponds to the Diagnostic test you
want to run (1, 2, 3, 4, or 5), then press
ENTER
.
The display for that test appears.
To select a diagnostic test by using the
STEP
or
BACK
keys:
1
Select DIAG on the Utilities menu as described on page 7-3.
The following display appears:
Enter Diag Test #1
REVIEW HISTORY FILE
Enter Diag Test #1
REVIEW HISTORY FILE
Enter test #
here