User`s manual

7-35
The Diagnostic Function (DIAG)
The Diagnostic function gives you access to five different
diagnostic tests. These tests are:
♦
review the most recent instrument run by examining the History
file
♦
test the sample block heating system
♦
test the sample block cooling system
♦
test the overall performance of your instrument
♦
verify that your instrument is still calibrated
Each of the diagnostic tests are numbered, 1 through 5, and
each test appears on a separate display. The diagnostic tests
and their corresponding numbers are:
TEST TEST #
Review History File 1
Heater Test 2
Chiller Test 3
System Performance Test 4
Verify Calibration 5