User`s manual

7-32
THIN Time Constant
This parameter works the same way as the MICRO time
constant. except that the default time constant values are
different. Change the sample tube time constant value for Thin
Walled GeneAmp Reaction Tubes as follows:
1
Select CONFIG on the Utilities menu as described on page 7-3.
The following display appears:
2
Press
ENTER
, then press
STEP
until the following display appears:
3
The default condition of this parameter is no. Press
OPTION
to
change “NO” to “DEFAULTS.”
4
Press
OPTION
again to change “DEFAULTS to MODIFY.” Press
OPTION
again to change “MODIFY” back to “NO.”
5
Press
ENTER
.
♦
If your instrument has software version 1.05 or higher, the following
display appears:
♦
If your instrument has software version 1.04 or lower, the following
display appears:
Configuration
E
DIT-PRINT
Set THIN tube time
constants? NO
Rxn vol=100uL T=12.0
Rxn vol= 50uL T=12.0
Rxn vol=100uL T=14.6
Rxn vol= 50uL T=14.6