User`s manual

7-16
The Configuration Function (CONFIG)
The Configuration function lets you customize the instrument by
editing the configuration parameters. These parameters include:
♦
time and date
♦
run-time printer mode (on or off)
♦
run-time beeper (on or off)
♦
pause time-out limit
♦
allowed setpoint error
♦
idle state setpoint
♦
temperature interval that triggers the clock start
♦
sample tube time constants
Editing the Configuration Parameters
There are eleven configuration parameters that you can edit.
These parameters appear on nine different displays. To move
forward through the displays, press STEP. To move backward
through the displays, press BACK. Press STOP at any time to
return you to the first Configuration display. Press STOP again to
return to the Utilities menu.
Figure 7-6 on the next page shows the displays for the
Configuration function. The sections that follow explain how to
edit the individual configuration parameters.