User`s manual

7-3
Selecting a Utilities Function
To select one of the Utilities functions:
1
Press
OPTION
to move the cursor from one function to the next.
When the cursor reaches DEL, press
OPTION
to move the cursor
back to DIR.
2
When the cursor is under your desired selection, press
ENTER.
You will then see the first display for the function you selected.
Figure 7-1 shows the first displays for the Utilities functions.
Figure 7-1
The Utilities functions.
Select function
D
IR-CONFIG-DIAG-DEL
Directory
PROG-TYPE-USER-PRINT
Configuration
EDIT-PRINT
Delete
PROGRAM-USER-ALL
Enter Diag Test #1
REVIEW History file
The Directory function lets you display
or print programs by their program
number, their type, or their user
number.
The Delete function lets you
delete individual programs by their program
number and user number, or delete all
programs.
The Configuration function lets you
configure and set default values for
general instrument operating
parameters.
The Diagnostic function lets you
review recent instrument runs
and perform heater, chiller, system
performance, and calibration
verification tests.