User`s manual

6-16
Indicator Lights
The three indicator lights on the control panel of the instrument
indicate the operating status, as described below.
♦
Heating, when lit, indicates that the heater is active. When
flashing, it indicates that the system is controlling the sample
temperature.
♦
Cooling, when lit or flashing, indicates that ramp cooling is
active.
Note
Both of the above lights will be lit simultaneously when the
sample is being held at a subambient temperature.
♦
Hot, when lit, indicates that the sample temperature is at
least 50 degrees C.
The next section describes the displays that appear on the
screen during a run.