User`s manual

6-13
4
If the “Special Tube?” parameter in the Configuration function (see
Chapter 7) has been set to “NO,” pressing the
OPTION
key will
change the tube type to Thin-Walled GeneAmp Reaction Tubes. On
the display, “MICRO” changes to “THIN.”
Note
Instructions for the use of sample tubes other than MicroAmp
Reaction Tubes will be included in separate documentation.
5
If the “Special Tube?” parameter in the Configuration function (see
Chapter 7) has been set to “YES,” pressing the
OPTION
key twice
will change the displayed tube type to “OTHER.” Select this option if
you are using tubes other than MicroAmp Reaction or Thin-Walled
GeneAmp Reaction Tubes.
6
To change the reaction volume, press the appropriate numeric
keys.
CAUTION
Do not press ENTER until the displayed tube type and
the displayed reaction volume are both set correctly.
Note
The next time you run this program, the tube type and reaction
volume you selected will be used as defaults. For methods, the tube
type and reaction volume you select before you run the method will be
used for every program in that method.