User`s manual

5-10
Creating a Program
1
Access the main menu.
2
Press the
OPTION
key to select CREATE, then press
ENTER
.
The following display appears
3
Press the
OPTION
key to select the type of program — HOLD,
CYCL, or AUTO — you want to create, then press
ENTER
. (The
METH option is used to create a method. See page 5-18.)
4
Specify the thermal cycling parameters for the program. The
displays in each program are described in the tables at the end of
this chapter.
The last display to appear allows you to run, store, or print the
program. For example, this display appears at the end of a CYCL
program:
5
In most cases, you will want to store the program and assign it a
number so that it can be run at any time. Use the following
procedure to store the program.
Select Option 9600
R
UN-CREATE-EDIT-UTIL
Create a program
H
OLD-CYCL-AUTO-METH
CYCL#??? xx.xC
R
UN-STORE-PRINT-HOME
Program Type:
CYCL
Program Number (not yet assigned)