User`s manual

3-25
5
Before the run starts, a display will appear that reminds you to close
and tighten the heated cover,
When the run starts, you will see a run-time display that is
continuously updated for the program being run. During ramp
segments, you will see the following display:
During hold segments, you will see the following display:
These two run-time displays alternately appear during ramps and
holds in the run.
6
Press the
MORE
key to display more information about the run.
A second run-time display appears:
O
Ramp to 96.5C xx.xC
0:30 Cycle 1
Current cycle #
Time remaining in current
Current sample
Setpoint temperature
temperature
ramp or hold segment
O
Ramp to 96.5C xx.xC
0:22 Cycle 1
Current cycle #
Time remaining in current
Current sample
Setpoint temperature
temperature
ramp or hold segment