User`s manual

3-24

Running the Program

Look at the display. The main menu (shown below) should be

displayed. If

not

press the

STOP

key one or two times.

With the cursor beneath RUN, press

ENTER

The following display appears:

Press the key for the number of the program you created and stored

earlier in this tutorial. (If it was the first program stored on the

system, press

.) Then press the

ENTER

key.

The following display appears:

This display lets you define the type of sample tube you are using

and the reaction volume of that tube. Press

ENTER

to accept the

default values displayed.

Note

If the printer has been enabled (using the Utilities function), a

display that reads “Select print mode” appears. Select OFF and press

ENTER

since a printer is not used in this example.

Select Option 9600

UN-CREATE-EDIT-UTIL

Run

Enter program # _

Select tube MICRO

Reaction vol? 100