Specifications

LQ-2080 Revision A
Product Description Hardware Specifications 9
1.2 Hardware Specifications
This section also contains information specific to the LQ-2080. For other
information, refer to the LQ-2070 Service Manual.
1.2.1 Printing Method
See the LQ-2070 Service Manual.
1.2.2 Printing Specifications
Copy capability: 1 original + 4 copies
Print speed and printable columns
Table 1-3. Print Speed and Printable Columns
NOTE:
1. When the power supply voltage drops to the lower limit, the printer stops printing
and then starts printing on that line again more slowly than before.
2. When the head temperature rises to the upper limit, the printer stops printing.
When the head temperature falls to the normal level, the printer start printing
again more slowly than before.
1.2.3 Paper Handling
Friction feed (front, rear)
Push tractor feed (front lever)
Push & Pull tractor feed (front, rear)
Pull tractor feed (front, rear, bottom)
Feed speed
Normal mode: 1/6 inch feed : 45 msec
Continuous feed : 0.127 MPS (m/second)
5.0 IPS (inchs /second)
Copy mode: 1/6 inch feed : 66 msec
Continuous feed : 0.092 MPS (m/second)
3.6 IPS (inches/second)
Print Mode
Character
Pitch
Printable
Columns
Print Speed (cps)
Normal Copy
High-speed
draft
10 cpi 136 400 266
Draft
10 cpi 136 300 200
12 cpi 163 360 240
15 cpi 204 450 300
Draft
Condensed
17 cpi 233 257 171
20 cpi 272 300 200
LQ
10 cpi 136 100 66
12 cpi 163 120 80
15 cpi 204 150 100
LQ Condensed
17 cpi 233 171 114
20 cpi 272 200 133