Specifications

LQ-2080 Revision A
Product Description Operation Instruction 16
1.4 Operation Instruction
This section provides information on the LQ-2080 control panel buttons,
LED, and operations. Since the layout and functions of the control panel
are mostly common to those of LQ-2070, this section only provides the
information that is specific to LQ-2080. For other information, see LQ-
2070 Service Manual.
Operations at power on
Turning on the printer while pressing panel buttons executes the
functions shown in the following table.
Table 1-7. Operations at Power On
NOTE: Unlike the LQ-2070, the LQ-2080 doees not support the
quiet mode.
Table 1-8. Default Setting Menu
No.
Load / Eject
Function
1 Load / Eject LQ self test
2 LF / FF Draft self test
3 Condensed
Default setting (See the following table for
the setting menu.)
4 Load / Eject & LF / FF Data dump
5 Font & Tear Off / Bin EEPROM clear
6 Tear Off / Bin & Load / Eject
Clear EEPROM for Driving Line count for
ribbon change timing
7 Pause Bi-d adjustment
8 The others Not available.
Item Setting / Value
*1
*1: Setings with bold weight meas the standard factory settings.
Page length for front tractor
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch,
8.5 inch,
11 inch
, 70/6 inch, 12 inch, 14 inch, 17 inch
Page length for rear tractor
Skip over perforation On,
Off
Auto tear off On,
Off
Auto line feed On,
Off
Print direction Auto,
Bi-d.
, Uni-d.
I/F mode
Auto
, Parallel, Optional
Auto I/F wait time
10 sec.
, 30 sec.
Software
ESC-P2
, IBM 2391 Plus
Character table
Standard version / NLSP version: See Section 1.2 for
the character tables available.
PC437
International character set
for Italic table
Italic U.S.A.
, Italic France, Italic Germany, Italic U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain
1
0 slash On,
Off
High speed draft
On
, Off
Input buffer
On
, Off
Buzzer
On
, Off
Auto CR (IBM 2391 Plus) On,
Off
A. G. M. (IBM 2391 Plus) On,
Off
Font
*2
*2: One of the fonts selected in the default setting is corresponding to others
(=other font) on the control panel. Following fonts are not selected in the default
setting mode; Draft, Roman, Sans serif, Courier, Prestige, and Script
OCR-B, Orator, Orator-S, Script C,
Roman T
,
Sans serif H
Roll paper On,
Off