Service manual

Stylus C40UX/C40SX/C20UX/C20SX Revision B
Disassembly and Assembly Disassembly 71
4.2.7 MAIN board removal
1. Remove the upper housing. (Refer to Section 4.2.1)
2. Remove the ASF unit. (Refer to Section 4.2.2)
3. Remove the PS unit. (Refer to Section 4.2.4)
4. Remove the two hooks, then remove the Switch cover.
Figure 4-26. Removing the Switch cover
5. Remove the three screws, then remove the shield cover.
Figure 4-27. Removing the Shield cover
Switch cover
Hooks
CBS 3×6
USB Type
Parallel Type
CBS 3×6
C.P.F.S-Tight 3×12