Service manual

Stylus C40UX/C40SX/C20UX/C20SX Revision B
Disassembly and Assembly Disassembly 68
4.2.6 Paper Guide Upper/Left removal
1. Remove the upper housing. (Refer to Section 4.2.1)
2. Place the OHP sheet between the Paper Guide Upper/Left and the PF roller by
rotating the protrusion of the Paper Eject roller gear in CW direction.
Figure 4-19. Place the OHP sheet
3. Press the dowel of the paper guide unit with tweezers, etc., then pull it forward and
remove it.
Figure 4-20. Removing the Paper Guide Upper/Left
C A U T I O N
Perform this operation by the following procedures so that the
coating material of the PF roller does not damage.
Protrusion
dowel
OHP paper