Quick Start Guide
Table Of Contents
- For Safety
- Restriction of Use
- Note about interference
- Open Source Software License
- About this Manual
- Contents
- Product Overview
- Setup of the Tablet
- Setup of the Printer
- Flow of Setup
- Placing the Printer
- Changing the Paper Width
- Connecting Peripheral Devices
- Connecting the Wireless LAN Unit
- Connecting the Customer Display
- Connecting the Optional External Buzzer
- Connecting the Cash Drawer
- Connecting to the Power Source
- Connecting the Printer to the Host Devices
- Attaching the Power Switch Cover
- Enabling the Roll Paper Near-End Detection
- Using Dedicated Optional Products
- Advanced Usage
- Software Settings
- Functions
- Receive buffer capacity
- BUSY condition
- Auto line feed
- USB power-saving function
- Release condition of receive buffer BUSY
- Select paper out detector enabled for paper out signal output
- Error signal settings
- Pre-feed before next print
- Roll paper near-end detection
- Network tethering
- Paper width
- Print density
- Print speed
- Thai characters print mode
- Character code table defaults
- International character defaults
- Interface selection
- Column emulation mode
- Command execution during offline
- Amount of top margin by backfeed
- Interface switch waiting time
- Main connection interface
- Autocutting after closing cover
- Paper reduction
- Font A auto replacement
- Font B auto replacement
- Font C auto replacement
- Multi-tone print density
- Optional buzzer
- Batch rotate print (Upside Down)
- Communication condition of USB interface
- Communication condition of Bluetooth interface
- Bluetooth communication interval during power saving mode
- Functions
- Network Settings
- Setting/Check Modes
- Printing a Status Sheet
- Resetting the Interface Settings
- TM-Intelligent Function
- Network Tethering (iOS device only)
- Software Settings
- Application Development Information
- Handling
- Appendix
- Product Specifications
- Specifications of Interface and Connector
- Bluetooth Low Energy Technology Advertising
- Character Code Tables
- Compatibility with USB Type-A
18
Chapter 1 Product Overview
Connectors
1 USB connector (USB-A - De-
vice Charging)
Color of the USB connec-
tor: white
Connects a USB cable of a tablet. Enables communication with the tablet while
charging the tablet.
No power is supplied to the connected tablet if the printer is turned off.
2,3,
4
USB connector (Type-A)
Color of the USB connec-
tor: black
Connects a USB cable of a peripheral device such as an optional Wireless LAN
cable set, customer display, or handheld scanner.
No power is supplied to the connected device if the printer is turned off.
5 USB connector (Type-B) Connects the USB cable for connecting to computers.
6 Power supply connector Connects the DC cable for the AC adapter.
7 Ethernet connector Connects the 10BASE-T/100BASE-TX LAN cable.
8 microSD card slot For a special purpose and cannot be used for daily use. For more details, contact
Epson sales partner.
9 Drawer kick connector Connects the modular cable for the cash drawer.
10 Status sheet button Use this button to print a status sheet on interfaces or initialize the settings on
interfaces.
A: Printer models without a microSD card slot
B: Printer models with a microSD card slot