Quick Start Guide

135
Appendix
*1: Installed character codes vary by printer model.
*
2: Only the character sets installed on the printer can be printed.
*3: Space between characters is not included. Characters can be scaled up to 64 times as large as the standard size.
Character size
*3
Standard/Double height/
Double width/Double height and width
Font A 1.25 × 3.00 mm/1.25 × 6.00 mm/
2.50 × 3.00 mm/2.50 × 6.00 mm
Font B 1.13 × 3.00 mm/1.13 × 6.00 mm/
2.26 × 3.00 mm/2.26 × 6.00 mm
Font C 0.88 × 2.13 mm/0.88 × 4.26 mm/
1.76 × 2.13 mm/1.76 × 4.26 mm
Special Font A 1.25 × 3.0 mm/1.25 × 6.0 mm/
2.5 × 3.0 mm/2.5 × 6.0 mm
{0.05 × 0.12"/0.05 × 0.24"/
0.10 × 0.12"/0.10 × 0.24"}
Special Font B 0.88 × 3.0 mm/0.88 × 6.0 mm/
1.76 × 3.0 mm/1.76 × 6.0 mm
{0.03 × 0.12"/0.03 × 0.24"/
0.06 × 0.12"/0.06 × 0.24"}
Kanji Font A 3.00 × 3.00 mm/3.00 × 6.00 mm/
6.00 × 3.00 mm/6.00 × 6.00 mm
Kanji Font B 2.00 × 2.00 mm/2.00 × 4.00 mm/
4.00 × 2.00 mm/4.00 × 4.00 mm
By specifying UTF-8 character encoding, all the installed character sets can be printed.
For more details on printing Unicode characters, see "FS ( C" of the ESC/POS command reference, or
manual of the software you use. (See "Application Development Information" on page 113)