Quick Start Guide
Table Of Contents
- For Safety
- Restriction of Use
- Note about interference
- Open Source Software License
- About this Manual
- Contents
- Product Overview
- Setup of the Tablet
- Setup of the Printer
- Flow of Setup
- Placing the Printer
- Changing the Paper Width
- Connecting Peripheral Devices
- Connecting the Wireless LAN Unit
- Connecting the Customer Display
- Connecting the Optional External Buzzer
- Connecting the Cash Drawer
- Connecting to the Power Source
- Connecting the Printer to the Host Devices
- Attaching the Power Switch Cover
- Enabling the Roll Paper Near-End Detection
- Using Dedicated Optional Products
- Advanced Usage
- Software Settings
- Functions
- Receive buffer capacity
- BUSY condition
- Auto line feed
- USB power-saving function
- Release condition of receive buffer BUSY
- Select paper out detector enabled for paper out signal output
- Error signal settings
- Pre-feed before next print
- Roll paper near-end detection
- Network tethering
- Paper width
- Print density
- Print speed
- Thai characters print mode
- Character code table defaults
- International character defaults
- Interface selection
- Column emulation mode
- Command execution during offline
- Amount of top margin by backfeed
- Interface switch waiting time
- Main connection interface
- Autocutting after closing cover
- Paper reduction
- Font A auto replacement
- Font B auto replacement
- Font C auto replacement
- Multi-tone print density
- Optional buzzer
- Batch rotate print (Upside Down)
- Communication condition of USB interface
- Communication condition of Bluetooth interface
- Bluetooth communication interval during power saving mode
- Functions
- Network Settings
- Setting/Check Modes
- Printing a Status Sheet
- Resetting the Interface Settings
- TM-Intelligent Function
- Network Tethering (iOS device only)
- Software Settings
- Application Development Information
- Handling
- Appendix
- Product Specifications
- Specifications of Interface and Connector
- Bluetooth Low Energy Technology Advertising
- Character Code Tables
- Compatibility with USB Type-A
12
Chapter 1 Product Overview
Product Overview
This chapter describes features of the product.
Features
Tablet can be directly mounted to the printer
• An iPad or Android device can be directly mounted to the printer and used just like a built-in display.
• You can mount a tablet to the printer just by sandwiching the tablet with the upper and lower tablet holders.
• The printer can be placed horizontally, vertically, or hung on a wall.
• Because the printer hardware/mechanism is the same as TM-m30II-H, development environment the same
as for TM-m30II-H is provided except for the NFC tag function.
Printing
• High speed receipt printing is possible (250 mm/s maximum).
• By using the included 58-mm width roll paper guides, 58-mm width roll paper can be used.
• Supports a variety of language (ANK (includes Thai language)/Japanese/Simplified Chinese/Traditional
Chinese/Korean)
• When the printer is placed vertically, you can print pages upside down to make it easier to read the pages by
using the "Batch rotate print (Upside Down)" function.
Handling
• Easy drop-in paper loading.
• You can connect to the printer from an interface, other than the mainly connected interface, and run print
operation, when mainly connected interface is not printing.
• The near end detector is installed as standard equipment. (The detection function can be enabled when
placing the printer vertically and using 80 mm width roll paper.)
• Ethernet, Bluetooth, and Wi-Fi connection status can be easily checked by viewing respective LED lights.
• A mechanism that holds paper while feeding paper backward enables reduction of top margin of each label
during continuous printing.
• Equipped with three USB Type-A ports for connecting the option devices.
• The USB port for connecting a tablet computer; USB-A - Device Charging, can provide up to 2.1A.
Software
• TM-Intelligent function is equipped.
• Supports Server Direct Print that sends a request for print data from the product to the Web server at
regular intervals.
• Supports status notification function, which enables the printer to send its status to a web server at a
regular interval.
• Printing triggered by bar code scan by smart device camera.
• A utility for iOS/Android
TM
(Epson TM Utility for iOS/Android) for making printer settings is provided.
• Printing of various types of bar codes, GS1-DataBar, and two-dimensional symbols (PDF417, QR code, Max-
iCode, Composite Symbology, Aztec Code, DataMatrix) is supported.
• A maintenance counter function is supported.