User Manual
Table Of Contents
- For Safety
- Restriction of Use
- Note about interference
- Open Source Software License
- About this Manual
- Contents
- Product Overview
- Setup of the Tablet
- Setup of the Printer
- Flow of Setup
- Placing the Printer
- Changing the Paper Width
- Connecting Peripheral Devices
- Connecting the Wireless LAN Unit
- Connecting the Customer Display
- Connecting the Optional External Buzzer
- Connecting the Cash Drawer
- Connecting to the Power Source
- Connecting the Printer to the Host Devices
- Attaching the Power Switch Cover
- Enabling the Roll Paper Near-End Detection
- Using Dedicated Optional Products
- Advanced Usage
- Software Settings
- Functions
- Receive buffer capacity
- BUSY condition
- Auto line feed
- USB power-saving function
- Release condition of receive buffer BUSY
- Select paper out detector enabled for paper out signal output
- Error signal settings
- Pre-feed before next print
- Roll paper near-end detection
- Network tethering
- Paper width
- Print density
- Print speed
- Thai characters print mode
- Character code table defaults
- International character defaults
- Interface selection
- Column emulation mode
- Command execution during offline
- Amount of top margin by backfeed
- Interface switch waiting time
- Main connection interface
- Autocutting after closing cover
- Paper reduction
- Font A auto replacement
- Font B auto replacement
- Font C auto replacement
- Multi-tone print density
- Optional buzzer
- Batch rotate print (Upside Down)
- Communication condition of USB interface
- Communication condition of Bluetooth interface
- Bluetooth communication interval during power saving mode
- Functions
- Network Settings
- Setting/Check Modes
- Printing a Status Sheet
- Resetting the Interface Settings
- TM-Intelligent Function
- Network Tethering (iOS device only)
- Software Settings
- Application Development Information
- Handling
- Appendix
- Product Specifications
- Specifications of Interface and Connector
- Bluetooth Low Energy Technology Advertising
- Character Code Tables
- Compatibility with USB Type-A
160
Appendix
Starting and stopping Bluetooth low energy technology Advertising
Format: cmd 0x08 0x000A n
Function: Starting and stopping transmission of the Advertising packet.
Device address specifications
Format: cmd 0x08 0x0005 n6 n5 n4 n3 n2 n1
Function: Specify a BD Address. Specify a value in Little Endian.
Bluetooth low energy technology Advertising parameter specifications
Format: cmd 0x08 0x0006 aL aH bL bH c d e f1 f2 f3 f4 f5 f6 g h
Function: Sets a variety of parameters for the Advertising packet.
See the Bluetooth specifications for details.
Parameter n Length Function
00 2 characters Advertising stop
01 2 characters Advertising start
When specifying a start point, make sure you start Advertising using this command before "Bluetooth
low energy technology Advertising Packet specifications" on page 161.
A
s a Random Static Address is used in TM-m30II-SL, bit7 and bit6 for n1 need to be set to 1.
Definition Length Default Description
Min advertising Interval 2 bytes aL: a0
aH: 00
00a0h * 0.625 = 100ms Period
00a0h is the minimum that can be
specified.
Max advertising Interval 2 bytes bL: a0
bH: 00
00a0h * 0.625 = 100ms Period
00a0h is the minimum that can be
specified.
Advertising type 1 bytes c: 03 03h: ADD_NONCONN_IND
Own address type 1 bytes d: 01 01h: random device address
Peer address type 1 bytes e: 00 00h: public device address
Peer address 6 bytes f1-f6: 00 No use
Advertising channel map 1 bytes g: 07 07h: All channel enabled
Advertising filter policy 1 bytes h: 02 02h: Process scan requests from all
devices and only connection requests
from devices that are in the White List.