Application Guide

A
Click the Printing Control menu.
B
Configure the following printing control items.
Setting Description
Paper width: Selects the paper width.
Logo 180 dpi Emulation Mode:
Enables or disables Logo 180 dpi Emulation Mode.
Logo 180 dpi Emulation Mode allows you to print logos created for 180dpi
printers on the same position and in the size when using TM-T20. However,
Storing Logos (U See “Storing Logos” on page 64), allows you to freely
adjust the size of logos when adding/editing them. So it is recommended to
use Storing Logos when adjusting the size of logos.
Print density: Selects the print density.
Print speed: Selects the print speed.
Power Supply Unit Capacity: Selects the capacity level of the power supply unit connected to the printer.
!
Caution:
❏ When you change the paper width
When changing the paper width from 80 mm to 58 mm, attach the Roll Paper Guide to the printer.
Changing the paper width from 58 mm to 80 mm may produce unexpected printout results. Make sure you
test print after changing the width.
❏ If a power-related trouble occurs, such as a sudden power shutoff during printing, lower the Power Supply
Unit Capacity level. If the trouble still occurs, lower the Print speed.
TM-T20II Software Installer Software User's Manual
TM-T20II Utility
74