Application Guide

C
Configure the Print logo when paper is cut.
Setting Description
Top Logo Sets the logo that is printed at the top of the paper.
❏ Key-code: Selects the Key-code of the logo to be printed.
❏ Alignment: Selects the logo print position.
Bottom Logo Sets the logo that is printed at the bottom of the paper.
❏ Key-code: Selects the Key-code of the logo to be printed.
❏ Alignment: Selects the logo print position.
Condition Sets the condition for top logo printing.
❏ When paper is cut by command: The checkmark cannot be removed
from this checkbox.
❏ When cover is closed: Sets whether the top logo is printed when the
cover is closed.
❏ When printer is powered on: When you select this, the printer is reset
every time the printer setting is changed, paper is automatically cut
and Top Logo is printed.
Extra Upper Space Reduction: Selects whether to reduce the top margin when printing the logo
configured at Top Logo. You can select this function only when Top Logo
is selected.
Selecting this may cause a white line to appear on the logo (13 mm away
from the top of the logo). Make sure to conduct a test print to see if the
print result is acceptable for you.
D
Click the Set button. The settings are reflected to the printer.
Printing Control Settings
Allows you to configure the printing control settings of the printer. Configure as follows.
TM-T20II Software Installer Software User's Manual
TM-T20II Utility
73