Application Guide

C
The Logo Edit screen appears. Edit the logo image while checking the image previewed on the upper portion of
the screen. When finished, click the OK button.
You can edit the followings.
Setting Description
Image width Specifies the width to which the image is resized (in mm).
Resize Specifies whether or not the image is resized. If the image width is greater
than the paper width and resizing is not specified, the part of the image
that exceeds the paper width will be cut off.
Half toning Configures the halftone setting of the image.
Brightness Configures the brightness of the image.
Density Configures the printing concentration.
D
If the logo mode is First Key-code Selection Mode and Automatically set the keycode for the logo to be
stored. is not turned on, the Key-code Settings screen is displayed. Set a Key-code and click the OK button.
If the logo mode other than First Key-code Selection Mode is selected or Automatically set the keycode for
the logo to be stored. is turned on, the Key-code Settings screen is not displayed.
E
The logo data is added on the list. When storing multiple logo data, repeat Step 1 through 4.
TM-T20II Software Installer Software User's Manual
TM-T20II Utility
68