Application Guide

Select Mode for Storing Logo has the following functions. The current setting is displayed below Storing Logos.

Setting Description

First Key-code Selection Mode Specifies the logo identifying code.

Automatically set the key-code for the logo to be stored. If this is turned on, automatically sets Key-codes to the logos

to be registered. If turned off, sets Key-codes when adding or

editing logos.

Advanced Printer Driver Control Font Setting Mode The Advanced Printer Driver allows you to assign a control

font (h to l) to your logo instead of using a key code.

Key-code Nonuse Mode (not recommended) Not recommended.

Key-code Management has the following functions. You can check the Key-code of the logo stored in the printer, or

delete the logos.

Setting Description

Get KeyCode Obtains registered Key-code numbers.

TM-T20II Software Installer Software User's Manual

TM-T20II Utility