Application Guide

Setting Description

When automatic paper cut activates: Configure the buzzer setting when automatic paper cutting takes place.

When specified pulse 1 (2 pin) occurs: Configure the buzzer setting when the specified pulse is generated.

When specified pulse 2 (5 pin) occurs: Configure the buzzer setting when the specified pulse is generated.

Buzzer: Test the buzzer. Select a sound pattern. To test the buzzer sound, click the

Test button.

Click the Set button. The settings are reflected in the printer.

Other Convenient Functions

Printer driver can be also used the ways shown below.

❏ Print by Registering Logo to Printer

❏ Sending Commands

❏ Print Device Font in .NET Environment

❏ Printing start position setting

❏ Print the 80mm width layout with 58mm width

❏ Alias name setting to font

❏ Creation of emulation font

❏ Replacing function of device font

❏ Printing Control Settings

Note:

For detail, see Advanced Printer Driver Ver.5 Printer Manual.

TM-T20II Software Installer Software User's Manual

Using the Printer Driver