Application Guide

Peripherals Setting Value Description

External Buzzer Turn off External buzzer does not sound.

Turn on External buzzer sounds.

Pattern Specify buzzer sound pattern.

Count Specify buzzer sound frequency.

Logo Printing

Logo can be printed at the beginning and the end of printing.

There are 2 printing methods.

❏ Print by Registering Logo to Printer Driver

U See “Print by Registering Logo to Printer Driver” on page 47

❏ Print by Registering Logo to Printer

For detail, see Advanced Printer Driver Ver.5 Printer Manual.

Note:

❏ The file formats that can be registered are BMP, JPEG, GIF and PNG.

❏ The maximum file size that can be registered is 2047 x 831 dots (width x height). Number of dots is calculated as

follow. Calculation formula: Number of dots = length (cm) / 2.54 (1 inch) x resolution level of TM printer (DPI)

Print by Registering Logo to Printer Driver

Note:

When using a serial interface, it is recommended to register a logo to the printer. For detail, see Advanced Printer Driver

Ver.5 Printer Manual.

Follow the steps below to register a logo and print.

Launch the APD5 utility.

Select Logo.

TM-T20II Software Installer Software User's Manual

Using the Printer Driver