Application Guide

Port type Item Description

COM Communicate with serial port. Set the following communication setting.

Port Specify the number of serial port used for connecting the printer.

Baud Rate Specify the baud rate.

Parity Specify the parity.

Stop Bits Specify the stop bits.

Flow Control Specify the method of data flow between the computer and the printer.

Data Bits Specify the data bits.

USB Communicate with USB port. Set the following communication setting.

USB Port Specify the USB port used for connecting the printer. Usually, no setting is

required.

Ethernet Communicate with Ethernet port. Set the following communication setting.

Ethernet Port Specify the Ethernet port used for connecting the printer. Usually, no setting is

required.

IP Address Set the IP address of Ethernet port the TM printer is connected.

Set to Printer Setup the IP address to the printer itself.

U See “Network Address Setting for Ethernet Printer” on page 18

Note:

When path through connection is used by the driver of APD4 customer display, adjust the TM printer's

communication settings with the communication settings of customer display driver set by APD4.

Set the followings from 4. Apply and click Save Setting.

Item Description

Set as Default Printer Check when configuring the printer as that normally used from

the Windows applications.

TM-T20II Software Installer Software User's Manual

Installation