Application Guide

I
The Connect Printer screen appears. Connect the computer to the printer, and turn the printer on.
When the USB connection between the computer and printer is established, a pop-up message; Installing
device driver software appears on the task tray, and the setup is automatically started. Proceed to Step 10 when
the setting is finished.
When you connect the printer using an interface other than USB, or when installing the driver without
connecting the printer, click the Next button.
J
When the installation is completed, the Installation Finished screen appears.
When conducting test print
Click the PrintingTest button. When the test print is finished, click
the Finish button to end the installation.
When exiting the installation
Uncheck the Run TM-T20II Utility. Then click the Finish button to
end the installation.
When setting the printer using TM-T20II Utility
continuously
Check the Run TM-T20II Utility checkbox (the box is checked by
default). Click the Finish button to end the installation. The
TM-T20II Utility starts to run.
U See “TM-T20II Utility” on page 55
TM-T20II Software Installer Software User's Manual
Installation
17