Specifications

11
2 Checking Your Installation
To verify that your USB software installed
properly, check the Device Manager. Click
Start
,
point to
Settings
, and click
Control Panel
. Then
double-click
System
and click the
Device
Manager
tab. You should see EPSON USB
Printer Devices listed. Click the
+
next to the
device name; you should see
EPSON USB/Parallel
Printer Adapter (EPUSB1:)
listed too. Click
OK
to
close the Device Manager; then close any other
open windows. (If you need to uninstall the
printer software, see your Printer Basics book.)
3 Installing Your Creative Software and
Electronic Manual
Once you’ve restarted your system, you can install the rest of the software on your
EPSON CD-ROM. Follow these steps:
1. Make sure the printer software CD-ROM is in your drive.
2. Double-click the
My Computer
icon on your Windows desktop.
3. Double-click the CD-ROM drive icon in the My Computer folder.
4. Then double-click the
EPSON
icon to start the installer. (Don’t select any
other icon in the folder.)
5. You see the License Agreement window. Read the agreement and click
Agree
.
6. You see the Main Menu:
Don’t use this button
to install your printer
driver if you’re using
the USB/Parallel
Adapter cable
660-usb.fm Page 11 Friday, September 24, 1999 11:18 AM