Instruction Manual

ManualsBrandsEpson ManualsPhoto PrintersC120

Page 1

1. Remove the soft protective cap from each

ink bag. Depress the metal tab on the inside

of the Quick Connect box and insert the plastic

ink valve into place. Release the metal tab to

lock the bag into place. Insert the black plastic

dividers to separate between the four ink bags.

Note— There are 5 (five) bulk ink dampers,

but only 4 ink bags. Two dampers are sup-

plied by the Black ink bag. The Black ink

bag has a “Y” tube splitter that fills both

black ink dampers.

2. Set the bulk ink dampers face down on a flat

surface with the round openings facing up.

Pierce the thin plastic tab that covers the open-

ing using the tip of a sharp object such as a

ball point pen. Firmly insert the tip of the plastic

syringe into the gasketed opening until the tip

is completed inserted.

Note -The plunger needs to be pushed in

and completely inserted into the syringe.

Epson C120/C110 Bulk Ink System Installation Instructions

Before you Begin

It is crucial that the OEM ink supplied with your printer is installed before you attempt to install your ChromaBlast inks.

This allows for two things: First, it primes the ink delivery system, ensuring that the ChromaBlast ink will load more eas-

ily. Second, it familiarizes you with the basic operation of your printer. Please see the EPSON Stylus C120/C110 Printer

User’s Guide for instructions on installation and printing a nozzle check.

Please read this document thoroughly before installing

the system to prevent voiding your warranty.

Components

1. Bulk Ink Dampers + tubes

2. Plastic Arm with Velcro adhesive

3. 4 Plastic syringes for priming

4. 3 Plastic dividers

5. ChromaBlast C120 or C110 Driver

6. QuickConnect Box

7. ChromaBlast Ink bags (Not included with QuickConnect

system)

8. Printer

Quick Connect Bulk Ink System Setup Instructions

3. Slowly extract the plunger. Ink will start to

flow through the tubing into the damper. Con-

tinue extracting the plunger until ink begins to

flow into the tip of the syringe.

Note: You may have to repeat this process

twice to complete the priming of each ink

damper.

Repeat this process for the other three ink

bags.

► ►

Once the ink bags have been connected your Quick Connect

bulk ink system should look like the graphic on the left.

Turn to page two for detailed instructions on how to connect

the Quick Connect bulk ink system to your Epson C120

printer.

Summary of content (2 pages)

PAGE 1
Epson C120/C110 Bulk Ink System Installation Instructions Before you Begin It is crucial that the OEM ink supplied with your printer is installed before you attempt to install your ChromaBlast inks. This allows for two things: First, it primes the ink delivery system, ensuring that the ChromaBlast ink will load more easily. Second, it familiarizes you with the basic operation of your printer.
PAGE 2
Epson C120/C110 Printer Setup Instructions ◄ ◄ 1. Turn the printer on. Wait for the printer to complete its start up procedure. Lift the lid, and press the ink button. The ink cartridge bay will shift into a position on the right. 2.. Raise the lid of the ink cartridge bay. Firmly grasp the lid and twist it sideways until it becomes dislodged. The lid will not be needed for proper functioning of the printer with either the Quick Connect sys- 3.