User Manual

Settings Explanations
Draw Borders
*
Select to print a border around the pages.
Paper Source Select the paper source you want to use.
User Defined Paper If your paper is not included in the Paper Size drop-down list, you can add the size
to the list. For more details, see Help for the printer driver.
Offset This setting allows you to offset the image on the page. That is, you can adjust the
position of the printed image. If the offset you specify moves a portion of the image
out of the printer’s printable area, that portion will not be printed.
Paper Size Select the size of the paper you want to use. If you do not see your paper size, use
the scroll bar to scroll through the list. If your paper size is not included in the list,
see “Definition of Custom Paper Size” on page 54 for instructions.
Copy Count
*
Select the number of copies you want to print. When you select more than one, this
check box is displayed and you can select whether to collate the copies.
Graphic - Print Quality Select the printing resolution you want. The higher the resolution you select, the
more detailed your printout will be; however, increasing the resolution slows print-
ing.
Advanced Printing Features
*
Select Enable or Disable for the metafile Spooling.
Pages per Sheet Layout
*
Select the layout direction for the pages you want to print.
Halftoning Select the type of halftoning to use when printing graphics. To let the printer deter-
mine the best halftone quality, use Auto Select.
Print Optimizations
*
Select Disable when the printer does not use the device fonts and select Enable
when the printer uses the device fonts.
Print Speed This setting allows you to select print speed. When Standard is selected, prints in
standard printing mode. When High Speed is selected, prints in high speed printing
mode.
Print Direction This setting allows you to select bidirectional printing. Selecting the Printer Setting
will use the setting stored in the printer. Selecting Bidirectional will print in bidirec-
tional printing mode. Selecting Unidirectional will print in unidirectional printing
mode.
Make sure that Bi-d is selected as the Print direction setting stored in the printer.
Otherwise this setting is ignored by the printer.
Printable Area If Standard is selected, the normal printable area for Epson impact printers is used.
If Maximum is selected, the printer’s maximum printable area is used.
Top Margin Priority Select which setting for the print start position is to be used; driver setting or printer
setting. For more details, see Help for the printer driver.
LQ-780/LQ-780N User’s Guide
Printer Software 53