User Manual

Auto CR (carriage return)
This setting is available in the IBMPPDS emulation mode. When auto carriage return is on, each
line feed (LF) code or ESC J code is accompanied by a carriage return code. This moves the print
position to the beginning of the next line.
A.G.M. (Alternate Graphic Mode)
This setting is available only in the IBMPPDS emulation mode. When A.G.M. is on, the printer can
use some advanced graphics commands like those available in the ESC/P2 mode.
Font
This setting allows you to set the font when you select Others on the control panel.
Pitch
You can select from among six pitch settings.
Character table
You can select among various character tables.
The character tables available vary according to the models available in the region. Make sure that
you select same character table as the printer driver if necessary.
International character set for Italic table
You can select among several international character sets for the Italic character table. Each
character set contains eight characters that vary depending on the country or language, so you can
customize the Italic table to suit your printing needs.
Manual feed wait time
This sets the amount of wait time between the time paper is inserted into the paper guide and
when it is fed. If the paper feeds before you can adjust its position to your satisfaction, you can
increase the wait time.
Buzzer (beeper)
The printer beeps when an error occurs. (See “Using the Error Indicators” on page 73 for more
information on printer errors.) If you do not want the printer to beep when an error occurs, turn
this setting off.
LQ-780/LQ-780N User’s Guide
Printer Basics 24