User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- About This Manual
- Safety Instructions
- Printer Basics
- Paper Handling
- Printer Software
- Troubleshooting
- Where To Get Help
- Options and Consumables
- Product Information
Example of label attachment position:
Selecting a Font and Menu
You can select one of the printer’s fonts and Menu (default settings) by using the buttons on the
printer’s control panel, as described below.
Note:
❏ You can select other fonts than the seven fonts on the control panel by selecting Others. Other fonts
can be set in the Default Setting mode. See “Changing default settings” on page 25. This function
is disabled when using the Windows driver. Driver control is enabled.
❏ Settings you make in application programs usually override settings you make from the printer’s
control panel. For best results, use your application to select a font and make other settings.
❏ Bar code fonts cannot be selected via the control panel.
1. Make sure that the printer is not printing. If it is, hold down the Pause button for three
seconds.
2. Press the o button until the three Font lights indicate the desired font as shown below.
HSD Courier
Draft Prestige
LQ-780/LQ-780N User’s Guide
Printer Basics 19