User Manual

6
LF/FF button (d)
(Single button)
Feeds paper line by line when pressing shortly.
Ejects a single sheet or advances continuous paper to the next top-of-form
position when held down.
7[Micro Adjust]
(Functions mode)
Hold down the button for three seconds, the printer enters the [Micro
Adjust] mode. Then press the button d and u to adjust the top-of-form or tear
off position. For details, see “Adjusting the tear off position” on page 45.
8
Load/Eject button (u)
(Single button)
Loads a single sheet of paper.
Ejects a single sheet of paper if a sheet is loaded.
Loads continuous paper from the standby position.
Feeds continuous paper backward to the standby position if a sheet is loaded.
9 Pause button (
)
(Single button)
Press this button while printing to temporarily stop printing.
Press again to resume printing.
10 Pause light (Yellow) The light is on when the printer is paused.
When the printer cover is open, the printer pauses automatically, and when you
close the printer cover, it is ready to print.
11 Paper Out light (Yellow) On when no paper is loaded in the selected paper source or paper is not loaded
correctly.
Flashes when paper has not been fully ejected or a paper jam has occurred.
12 [Reset]
(Button combinations)
Press both button d and u, simultaneously, the printer clears buffer and returns
to its default settings.
LQ-780/LQ-780N User’s Guide
Printer Basics 17