User Manual

Item Setting / value *1
Packet mode Auto, Off
Auto CR (IBM PPDS)*
2
Off, On
A.G.M. (IBM PPDS)*
2
Off, On
Font OCR-B, Orator, Orator S, Script C, Roman T, Sans Serif H
Pitch 10cpi, 12cpi, 15cpi, 17cpi, 20cpi, Proportional
Character table Standard model: Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO 8859-15
All other models: Italic, PC437, PC850, PC 437 Greek, PC853, PC855,
PC857, PC864, PC866, PC869, MAZOWIA, Code MJK, ISO 8859-7, ISO
Latin 1T, Bulgaria, PC774, Estonia, ISO8859-2, PC866UKR, PC APTEC,
PC708, PC720, PCAR 864, PC860, PC861, PC863, BRASCII, Abicomp.
Roman 8, ISO Latin 1, PC858, ISO8859-15, PC771, PC437 Slovenia, PC
MC, PC1250, PC1251, KZ1048
International character set for Italic table Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark,
Italic Sweden, Italic Italy, Italic Spain
Manual feed wait time 0.5 second, 1.0 seconds, 1.5 seconds, 2 seconds, 3 seconds
Buzzer Off, On
Sleep timer 1 minutes, 1 minutes 30 seconds, 2 minutes, 2 minutes 30 seconds,
3 minutes, 3 minutes 30 seconds, 4 minutes, 4 minutes 30 seconds
Low-noise mode Off, On
Copy mode Off, On
Disable IPsec/IP Filtering *
3
Off, On
Link Speed & Duplex *
3
Auto, 10BASE-T Half Duplex, 10BASE-T Full Duplex, 100BASE-T Half
Duplex, 100BASE-T Full Duplex
*1 Settings in bold are the default settings. These may vary depending on the country.
*2 These settings are effective when IBM PPDS emulation is selected.
*3 LQ-780N only
Page length for tractor
This setting allows you to set the page length (in inches) for the continuous paper loaded on the
tractor. When you set the correct paper length, the Skip over perforation and Auto tear off
functions will work properly.
LQ-780/LQ-780N User’s Guide
Printer Basics 21