User Manual

D
Use the cleaning kit, or the clean side of the soft
cloth, to wipe the glass surface.
c
Important:
❏ Do not apply excessive force to glass
surfaces.
❏ Do not use brushes or hard objects. They
may scratch the glass surface and affect
the scan quality.
❏ Do not directly spray cleaner onto the
class surface.
E
After you have finished cleaning, close the
scanner cover.
c
Important:
Close the scanner cover right after you have
finished cleaning to prevent dust from getting
inside.
Unable to Properly Feed Originals
If the right side of the original's loading position is
incorrect, the original cannot be fed properly.
Check the position of the document guide on the right
side.
If you do not want to use the optional carrier sheet
If the original's loading position is correct, check the
following items. If the original still cannot be fed
properly, change Original Size or Scan Size to the
standard size from Auto Detect.
o
Is the original loaded with skew?
Reload the original. If the original is loaded with
skew, it cannot be fed properly.
o
Is the original folded?
Unfold the original.
If the original is folded while the printer is set to
Auto Detect in Original Size or Scan Size, the
width of the original may not be read correctly,
which may cause the original to not feed properly.
o
Clean inside of the scanner.
If the printer is set to Auto Detect in Original Size
or Scan Size, the width of the original may not be
read correctly, which may cause the original to not
feed properly.
How to Clean Inside the Scanner
U “Lines Appear on Scanned or Copied
Documents” on page 209
If you are using the optional carrier sheet
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Problem Solver
211