User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Introduction
- Notes on Manuals
- Printer Parts
- Features of Printer
- Realizing High Productivity
- Realizing High Resolution
- Insistence on Ease-of-Use
- Back and side can be placed next to a wall
- Checking current operating status even from afar thanks to an alert lamp
- Smooth operation while checking the operating instructions on the screen
- Printer driver that is simple and easy to operate
- Support for wireless LAN connection
- Installing a color sensor (SC-T5400M Series)
- Notes on Usage and Storage
- Saving Power
- Introducing the Software
- Changing the Network Connection Methods
- Loading and Setting the Paper
- Printing with the Printer Driver from Your Computer
- Basic Operating Procedures (Windows)
- Basic Operating Procedures (Mac)
- Printing CAD Drawings
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Borderless Printing
- Correct color and print
- Color Management Printing
- Multi-Page Printing (N-up)
- Folded 2-Sided Printing (Windows only)
- Poster Printing (Windows Only)
- Printing Multiple Documents (Layout Manager)(Windows Only)
- Printing Using the HP-GL/2 or HP RTL Mode from a Computer
- Printing without Using the Printer Driver
- Copy (SC-T5400M Series Only)
- Scanning (SC-T5400M Series Only)
- Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series Only)
- Using the Menu
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- When a Maintenance Call/Printer Error Occurs
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- Printing from iPhone or iPad is not possible.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The print head moves, but nothing prints.
- The prints are not what you expected
- Main troubleshooting procedures
- When you want to unclog the print head
- Ink drips
- Fine lines in drawings are not printed
- Differences in color/light/dark
- The color is not exactly the same as another printer.
- The print is not positioned properly on the media.
- Lengths differ between the print results and print data
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Soiling occurs at a specific position on the print surface
- The paper is creased.
- The reverse side of the printed paper is soiled.
- Blurred text, lines, and images
- Printed over the barcode for Manage Remaining Amount
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Print head is automatically cleaned
- The printer turned off due to a power cut
- Copying or Scanning Problems (SC-T5400M Series Only)
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Australia
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Settings item Settings value Explanation
Scan Size
Auto Detect -
The default setting of Auto Detect is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is
Auto Detect. Similarly, tracing paper and the optional carrier sheet
are not detected automatically. In such cases, change from the
standard size and specify a width of your choosing. If the desired
size is not in the options, then select User-Defined, and enter the
length and width of the original.
ISO A Display supported scan
sizes
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined Display the Scan Size
Input screen
Top Offset
0.0 to 100.0mm (0.0
*
)
0.00 to 3.94inch (0.00
*
)
If you do not want to scan the top margin of the original, you can
adjust the top, and then scan. Enter the value for the length from
the top of where you want to start scanning.
If the carrier sheet is loaded, set the value to 19 mm.
Original Type
Text & Image
*
Select the type in accordance with the loaded original.
Tracing Paper
Recycled
Blueprint
Blueprint Inverted
Watercolor Rendering
Density
-4 to 4 (0
*
)
Select the density for scanning. Negative values (-) are lighter and
positive values (+) are darker.
Image Quality
Contrast
-4 to 4 (0
*
)
Set the contrast. Negative values (-) are weaker and positive values
(+) are stronger.
Sharpness
-4 to 4 (0
*
)
Set the sharpness. Negative values (-) are weaker and positive
values (+) are stronger.
Remove Back-
ground
-4 to 4 (0
*
)
Set the adjustment value for removing the background. Configure
this setting when you are scanning originals with colors or originals
that are thin or when removing unwanted backgrounds. Negative
values (-) are weaker and positive values (+) are stronger.
File Name
Filename Pre-
fix-4-4
Enter the filename prefix Use single-byte alphanumeric characters or symbols to enter the
prefix for the file name of the image.
Add Date
On
*
Add the date to the file name.
Off
Add Time
On
*
Add the time to the file name.
Off
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
173