User Manual

Settings item Settings value Explanation
Palette B
Pen 0 to Pen 15
Pen Width 0.13 to 12.00 mm
In Select Palette, selecting Palette B will print in accordance with the
settings defined here.
Settings details are the same as for Palette A.
Pen Color 0 to 255
Restore default
HP-GL/2 Unique Set-
tings
No
Select Yes to restore all HP-GL/2 Unique Settings settings to the default
settings.
Yes
Memory Device Inter-
face
Enable
*
Select whether to permit (Enable) or not permit (Disable) connecting a
USB flash memory to the printer and then directly printing the data in the
memory.
Disable
Thick Paper
Off
*
If the paper is thick, the print head may scuff the print surface. Choose On
to prevent scuffing. If On is set, the platen gap, which is the distance
between the print head and paper, will widen. However, if the platen gap
is already at its maximum, then setting this to On will have no effect.
On
Self Check and Cleaning Off Self Check and Cleaning is a function to automatically perform a print
head clogging check and perform cleaning if there is clogging at times
such as when the power is turned on or before starting printing. Select
the number of times to perform automatic cleaning when there is
clogging. If Off is selected, both the check and cleaning will not be
performed.
Once
*
Twice
Three times
Bidirectional
On
*
Setting this to On will cause the print head to print while moving both
left and right. Setting this to Off will reduce the ruled line misalignment,
but printing will take more time.
Off
PC Connection via USB
Enable
*
Setting this to Enable allows access from a USB-connected computer.
Setting this to Disable does not allow access.
Disable
USB I/F Timeout Setting 0 sec, or 5 to 300
sec (60
*
)
If printing stops mid-way when the printer and computer are connected
by a USB cable, set a longer time.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
153