User Manual

If you are using the carrier sheet to scan, align
the document guide with the position indicated
in the illustration.
B
Face the scanning side upward and align the
right edge of the document with the document
guide. Insert the leading edge of the document
into the scanner's paper slot until you hear a beep.
Load the document in the direction indicated
by the illustration.
C
Align the document guide on the left side with
the edge of the document.
D
Check that the paper basket is open.
Procedure for Copying
A
Load the paper into the printer.
U “Loading and Setting the Paper” on
page 32
B
Load the document into the printer.
U “How to Load Documents” on page 102
C
Touch Copy on the Home screen.
D
In Basic Settings, do the settings for Color,
Quality, Density, and Reduce/Enlarge.
U “Copy menu (SC-T5400M Series Only) ”
on page 167
If you are doing detailed settings, such as
Original Type, do the settings from Advanced.
U “Copy menu (SC-T5400M Series Only) ”
on page 167
If you are using the optional carrier sheet, you
must do the following settings in Advanced.
❏ Specify the Original Size from a standard size.
❏ Set Top Offset to 19 mm.
E
Touch the numeric value for the number of
prints and then enter the number of prints in
the keypad screen.
F
Press the Copy button to start scanning the
document.
G
Remove the original when scanning is complete.
While holding the original, press the OK
button on the screen, and then remove the
original.
Printing starts when the original has been
completely removed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Copy (SC-T5400M Series Only)
103