User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Settings item Setting/Additional Explanation
Head Cleaning Cleans the selected color.
Only run this when the nozzles are clogged.
U “Cleaning the print head” on page 116
Power Cleaning Cleans the selected color.
Only run this when you cannot clear the clogged nozzles even after
repeating normal print head cleaning several times.
U “Cleaning the print head” on page 116
Remove Paper Removes any scraps of paper that remain inside the printer.
Ink Cartridge(s) Replacement Displays the amount of ink remaining and the model number for the
cartridge.
Touch How To... to view the replacement instructions on the screen.
Replace Maintenance Box Displays the amount of free space remaining and the model number of the
maintenance box.
Touch How To... to view the replacement instructions on the screen.
Replace Cutter You can replace the cutter.
Touch How To... to view the replacement instructions on the screen.
Adjust Cut Position -3.0 to +3.0 mm
SProofer Setting This is only displayed when a SpectroProofer is installed.
Cleaning the Maintenance Parts
Wiping the Print Head You can clean the print head.
Touch Start to move the print head to the cleaning position.
Wiping around the Cap You can clean around the caps.
Touch Start to move the print head to the cleaning position.
Keeping/Transporting Preparation
Keeping Preparation
Touch Start to discharge ink.
When the ink has been discharged, the printer is automatically turned off.
Personal Transport Preparation
Touch Start to discharge ink.
When the ink has been discharged, the printer is automatically turned off.
Language
You can select the language displayed on the panel. Select from the following languages.
Dutch, English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Simplified Chinese, Spanish,
Traditional Chinese
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
113