User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Settings item Setting/Additional Explanation
PS3 Menu (This item is only displayed when the PS option is connected.)
Version Displays the PostScript/PDF version.
Output Size Auto, A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series,
Others, User-Defined
Margin Options Standard, Add Margins, Clip By Margins
Select the difference between the size of the print data and the size of the
output paper.
Quality Draft, Standard, Fine
Color Mode Color, B&W
Only displayed when a paper type that supports color printing and
monochrome printing is selected.
CMYK Simulation You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer.
RGB Source When printing RGB data, you can select the RGB color definition you want
to simulate.
Rendering Intent You can select how to convert color spaces during Absolute Colorimetric,
Relative Colorimetric, Perceptual, Saturation CMYK simulations and RGM
simulations.
Black Point Compensation On, Off
Normally, select On. Select "Off" if you notice that shadows are too bright
when converting from a wide color space to a narrow color space.
Auto Rotate On, Off
When this is set to "On", the print data is automatically rotated 90 degrees
to the right depending on conditions such as the paper width and data
size.
Caching To HDD On, Off
Normally, select Off. Set this to On if the print head stops frequently while
printing. This may solve the problem.
Save To HDD Print And Save, Print Only, Save Only
PS Error Sheet On, Off
When this is set to On, the contents of the error are printed when a
PostScript error occurs.
Optimize Edge Quality On, Off
When this is set to On, everything is printed in single head mode. The print
quality at the edges is improved, but the print speed is reduced and the
margin at the leading edge is increased by about 35 mm compared to
when this is set to Off.
When this is set to Off, everything is printed in dual head mode. Select On if
you are worried about the print quality at the leading edge of the paper.
PDF Rendering Level Level 1 - 5
Normally, this is set to 5. Although this may create a PS that reproduces the
PDF as faithfully as possible, you may not be able to print. If this occurs, try
lowering the rendering level.
Clear All Settings Restores the PS settings to their default settings.
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
110