User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Control panel
A Home button
Touch this button while a menu is displayed to
return to the Home screen.
The home button is off when it cannot be used
during operations such as paper feeding.
B Power lamp
On : The power is on.
Flashi
ng
: The printer is performing a process such as
starting up, powering off, data receiving, or
print head cleaning. Please wait without
performing any operation until this light
stops flashing. Do not disconnect the
power cord.
Off : The power is off.
C Power button
D Control panel
This is a touch panel to display the printer's status,
menus, error messages, and so on.
Home screen operations
A Menu
Allows you to make paper settings, printer settings,
and perform printer maintenance. See the following
for a list of the menus.
U “Paper Setting” on page 101
B Information display area
Displays the printer's status, error messages, and so
on.
C Paper loading information
Displays paper information for the loaded paper.
D Display ink levels
Displays the amount of ink remaining in the ink
cartridges. When the
symbol is displayed, the
ink cartridge is running low. Press the display to
check the cartridge model number.
E Displays amount of space remaining in the
maintenance box
Displays the approximate amount of space in the
maintenance box. When the
symbol is
displayed, the maintenance box is running low.
Press the display to check the maintenance box
model number.
F Information
You can check the status of the printer by viewing
consumable information and the list of messages.
You can also check the job history.
G Internet connection status
SC-P9500 Series/SC-P7500 Series User's Guide
Notes on Manuals
11