User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
SC-P9570/SC-P7570
Color Name
Part number
700 ml 350 ml 150ml
Photo Black T44H1 T44P1 T44W1
Cyan T44H1 T44P2 T44W2
Vivid Magenta T44H3 T44P3 T44W3
Yellow T44H4 T44P4 T44W4
Light Cyan T44H5 T44P5 T44W5
Vivid Light Magenta T44H6 T44P6 T44W6
Light Black T44H7 T44P7 T44W7
Matte Black T44H8 T44P8 T44W8
Light Light Black T44H9 T44P9 T44W9
Orange T44HA T44PA T44WA
Green T44HB T44PB T44WB
Violet T44HD T44PD T44WD
SC-P9580/SC-P7580
Color Name
Part number
700 ml 350 ml
Photo Black T44L1 T44S1
Cyan T44L2 T44S2
Vivid Magenta T44L3 T44S3
Yellow T44L4 T44S4
Light Cyan T44L5 T44S5
Vivid Light Magenta T44L6 T44S6
Light Black T44L7 T44S7
Matte Black T44L8 T44S8
Light Light Black T44L9 T44S9
Orange T44LA T44SA
Green T44LB T44SB
Violet T44LD T44SD
SC-P9500 Series/SC-P7500 Series User's Guide
Appendix
153