User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Settings item Setting/Additional Explanation
Remove Poster board is ejected.
After the paper is ejected, information on how to remove the poster board is
displayed.
Print Adjustments
Paper Feed Adjust Quality First, Length Accuracy First
Print Head Alignment Uni-D Alignment, Bi-D Alignment
You can adjust automatically or manually. Perform print head alignment when
the print results look grainy or out-of-focus. Normally, select Auto. If you are not
satisfied with the results of auto adjustment, perform manual adjustments. See
the following for details on the adjustment method.
U “Print Head Alignment” on page 118
Advanced Paper Settings
Confirm ICC profile Displays the ICC profile name.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Confirm Color Density Displays the Color Density.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Paper Thickness 0.01 - 1.50 mm
This item is only displayed for Custom Paper Setting.
Paper Suction -4 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the setting.
Drying Time Drying Time per Pass, Drying time per page
You can set the drying time for each print head movement (pass) or the drying
time for each page.
Paper Size Check On, Off
When this is set to On, the width of the loaded paper is automatically detected.
Skew Reduction On, Off
Select whether to enable (On) or disable (Off) paper skew reduction while printing
on paper.
Paper Feed Offset -1.0 - +1.53%
This item is only displayed for custom paper.
Restore Default Settings The advanced paper settings are saved for the paper type. Select this when you
want to restore the default settings.
This item is not displayed when Custom Paper is selected.
Change Paper Type/Paper Size
Paper Type Recently Used Paper, Recently Registered Paper, More Paper Types (Photo Paper,
Proofing Paper, Fine Art Paper, Matte Paper, Campus Paper, Plain paper, Others,
Custom Paper)
Paper Size A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series, Others,
User-Defined
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
105