WF-3720/WF-3730/WF-4720/WF-4730 Series User's Guide
Contents WF-3720/WF-3730/WF-4720/WF-4730 Series User's Guide.................................................................... 13 Product Basics .......................................................................................................................................... Using the Control Panel ..................................................................................................................... Control Panel Buttons and Lights ...................................................
Using Fire OS Printing ....................................................................................................................... Using Windows 10 Mobile Printing .................................................................................................... Using Epson Print and Scan App with Windows Tablets ................................................................... Printing and Scanning with NFC from Your Android Device ...........................................................
Selecting the Universal Print Settings ................................................................................................ 82 Universal Print Settings Options .................................................................................................... 83 Placing Originals on the Product ............................................................................................................. Placing Originals on the Scanner Glass ......................................................
Paper Source Options - Mac ................................................................................................... Print Quality Options - Mac ..................................................................................................... Print Options - Mac ................................................................................................................. Selecting Page Setup Settings - Mac .....................................................................................
Additional Scanning Settings - Advanced Settings Tab ............................................................... 158 Saving Scanned Documents as a Searchable PDF Using Epson Scan 2 ................................... 159 Image Format Options................................................................................................................. 161 Scan Resolution Guidelines ........................................................................................................ 161 Faxing.......
Fax Reception ............................................................................................................................. 202 Receiving Faxes Automatically ................................................................................................... 203 Receiving Faxes Manually........................................................................................................... 203 Receiving a Fax by Polling .......................................................................
Replacing the Maintenance Box....................................................................................................... 235 Adjusting Print Quality............................................................................................................................ Print Head Maintenance................................................................................................................... Print Head Nozzle Check..................................................................
Solving Paper Problems................................................................................................................... Paper Feeding Problems............................................................................................................. Paper Jam Problems in the Cassette .......................................................................................... Paper Jam Problems in the Rear Cover ...............................................................................
Image is Distorted or Blurry ......................................................................................................... 300 Image Colors are Patchy at the Edges ........................................................................................ 301 Image is Too Dark ....................................................................................................................... 301 Back of Original Image Appears in Scanned Image .....................................................
Environmental Specifications ........................................................................................................... Interface Specifications .................................................................................................................... External USB Device Specifications................................................................................................. Network Interface Specifications ....................................................................
WF-3720/WF-3730/WF-4720/WF-4730 Series User's Guide Welcome to the WF-3720/WF-3730/WF-4720/WF-4730 Series User's Guide. For a printable PDF copy of this guide, click here.
Product Basics See these sections to learn about the basic features of your product. Note: Your product may differ from the illustrations in this guide, but the instructions are the same.
Control Panel Buttons and Lights 1 2 power button and light NFC (Near Field Communication) tag 3 received fax light 4 supply status button 5 network status button 6 sound button 7 preset button 8 home button 9 10 LCD screen help button Status Icon Information Parent topic: Using the Control Panel Status Icon Information Your product displays status icons on the LCD screen for certain product status conditions. Press the icon to view or change the current network settings.
Icons Description Displays additional information or instructions, such as loading paper or placing a document. Displays the Supply Status screen. Quiet Mode is enabled. Noise is reduced during printing, but the print speed may be reduced. Press this icon to change the settings. Quiet Mode is disabled. Press this icon to change the settings. Displays the Fax Data Information screen. There is a problem with the indicated setting. Press the icon to resolve the problem. No Ethernet connection.
Entering Characters on the LCD Screen Follow these guidelines to enter characters for passwords and other settings. • To move the cursor, select the left or right arrows. • To change the case of letters, select . • To delete the previous character, select . • To enter numbers or symbols, select • To enter a space, select . .
3. Select General Settings. 4. Select Basic Settings. 5. Select Date/Time Settings.
You see a screen like this: 6. Select Daylight Saving Time. 7. Select the setting that applies to your area: • Winter: it is winter or your region does not use Daylight Saving Time (DST) • Summer: it is spring or summer and your region uses Daylight Saving Time (DST) Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the season. When you change from Winter to Summer, your product automatically sets its clock ahead one hour.
1. Press the 2. Press the home button, if necessary. preset button. You see a screen like this: 3. Select Add New. 4. Select the function for which you want to set up a preset. You see the main screen for that function, such as the Copy screen: 5. Select the settings you want to save and select Register.
You see a screen like this: 6. Select Name. You see a screen like this: 7. Use the displayed keyboard to enter a name for the preset and select OK. 8. Select OK. When you copy, fax, or scan, you can use the preset by pressing the preset name from the list.
Parent topic: Using the Control Panel Related tasks Entering Characters on the LCD Screen Changing LCD Screen Language You can change the language used on the LCD screen. 1. Press the home button, if necessary. 2. Select Settings. 3. Select General Settings. You see a screen like this: 4. Select Basic Settings. 5. Scroll down and select Language. 6. Select a language.
3. Select General Settings. You see a screen like this: 4. Select Basic Settings. 5. Select Sound. 6. Select Normal Mode or Quiet Mode. Note: Press the icon on the home screen to switch between Normal Mode and Quiet Mode. 7. Select Button Press. 8. Press to decrease or to increase the sound. 9. Select OK to exit. Note: You can also adjust the Sound Type and the sound level for various product functions.
2. Select Settings. 3. Select General Settings. You see a screen like this: 4. Select Basic Settings. 5. Select LCD Brightness. 6. Press the – or + icons to decrease or increase the brightness. 7. Select OK to exit. Parent topic: Using the Control Panel Turning Off the Operation Time Out Setting The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes of inactivity. This feature is enabled by default, but you can turn it off. 1.
You see a screen like this: 4. Select Basic Settings. 5. Scroll down and set Operation Time Out to Off. Parent topic: Using the Control Panel Preventing PC Connection via USB You can disable access from a USB-connected computer. This restricts non-network access to the product and protects the security of confidential scanned documents. 1. Press the home button, if necessary. 2. Select Settings. 3. Select General Settings.
You see a screen like this: 4. Select Printer Settings. You see a screen like this: 5. Scroll down and select PC Connection via USB. 6. Select Disable.
Product Parts Locations See these sections to identify the parts on your product.
7 Paper cassette 2 (WF-3730/WF-4730 Series) 1 Output tray 2 Paper cassette edge guides 3 Paper cassette Parent topic: Product Parts Locations 28
Product Parts - Inside 1 Document cover 2 Scanner glass 3 Control panel 29
4 USB Type A port for external devices 1 Scanner unit 2 Ink cartridge holder (do not remove) Parent topic: Product Parts Locations 30
Product Parts - Back 1 Rear cover 2 LAN port 3 USB port 4 AC inlet 5 LINE port 6 EXT port Parent topic: Product Parts Locations Checking for Software Updates It's a good idea to check Epson's support website occasionally for free updates to your product software. Visit epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean) and select your product. Note: Your printer is designed to work only with genuine Epson-brand ink cartridges.
performance, minor bug fixes and ensure the printer functions as designed. These updates may affect the functionality of third-party ink. Non-Epson branded or altered Epson cartridges that functioned prior to a firmware update may not continue to function. • Windows: Your printer software automatically checks for updates.
You see a screen like this: 4. Select Basic Settings. 5. Select Sleep Timer. You see a screen like this: 6. Do one of the following: • Press the – or + icon to decrease or increase the number of minutes.
• Press the number of minutes on the LCD screen, select the number of minutes from the on-screen keypad, and press OK. 7. Select OK. Parent topic: Using Power Saving Settings Changing the Power Off Timer Settings You can have the product turn off automatically if it is not used for a specified period of time. 1. Press the home button, if necessary. 2. Select Settings. 3. Select General Settings. You see a screen like this: 4. Select Basic Settings. 5.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the software described in this section. You also cannot download and install any Epson product software from the Epson website for use with Windows 10 S; you must obtain software only from the Windows Store.
You see a screen like this: 4. Select Web Service Settings. 5. Select Epson Connect Services You see a screen like this: 6. Select Register. 7. Follow the instructions on the screen to activate your product's email address.
Related topics Wi-Fi or Wired Networking Using Epson Email Print With Epson Email Print, you can print from any device that can send email, such as your smartphone, tablet, or laptop. Just activate your product's unique email address. When you want to print, attach a PDF, Microsoft Office document, or photo to an email and send it to your product. Both the email and the attachments will print automatically. 1. Connect your product to your network. See the link below. 2.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More Related topics Wi-Fi or Wired Networking Using Epson Remote Print With Epson Remote Print software, you can print from your laptop or desktop computer to an Epson Email-enabled product anywhere in the world. 1. Connect your Epson product to your wireless network. See the link below. 2. If you did not already set up an Epson Connect account when you installed your product software, visit epsonconnect.
3. Visit epsonconnect.com to sign into your account with the email address and password you selected. 4. Select your product, select Scan to Cloud, and select Destination List. 5. Click Add, then follow the instructions on the screen to create your destination list. 6. Now you are ready to use Scan to Cloud. Select the setting for scanning to Scan to Cloud on your Epson product control panel.
Related topics Wi-Fi or Wired Networking Using Google Cloud Print With a Google Account, you can print from your Apple or Android device to your Epson product. You can also print from Chromebooks and the Google Chrome browser without drivers or cables. 1. Connect your Epson product to your wireless network. See the link below. 2. Note your product's IP address by checking your network status. See the link below. 3.
Related topics Wi-Fi or Wired Networking Android Printing Using the Epson Print Enabler You can wirelessly print your documents, emails, photos, and web pages right from your Android phone or tablet (Android v4.4 or later). With a few taps, your Android device will discover your nearby Epson product and print. 1. Connect your Epson product to your wireless network. See the link below. 2. On your Android device, download the Epson Print Enabler plug-in from Google Play. 3.
Visit epson.com/connect (U.S), epson.ca/connect (Canada), or epson.com.jm/connect (Caribbean) to learn more about Fire OS Printing (one of many Epson Connect Partner Solutions) and check the compatibility of your mobile device. Parent topic: Product Basics Related topics Wi-Fi or Wired Networking Using Windows 10 Mobile Printing You can wirelessly print from Windows 10 Mobile tablets and phones to your nearby networked Epson product.
Now you are ready to print photos or scan. Visit epson.com/connect (U.S), epson.ca/connect (Canada), or epson.com.jm/connect (Caribbean) to learn more about Epson Print and Scan App. Parent topic: Product Basics Related topics Wi-Fi or Wired Networking Printing and Scanning with NFC from Your Android Device You can easily connect your Android 4.0 or later device to your product using NFC (Near Field Communication). Once connected, you can print and scan using Epson iPrint. 1.
4. Touch the NFC antenna of your Android device to the NFC tag on your product. Note: The location of your mobile device's NFC antenna varies. See your mobile device documentation for details. Epson iPrint opens on your device. Note: If you do not have Epson iPrint installed, the app store page for the Epson iPrint app opens on your device. Install Epson iPrint and repeat this step. 5. Touch the NFC antenna of your Android device to the product NFC tag on your product again.
Wi-Fi or Wired Networking See these sections to use your product on a Wi-Fi or wired network. Wi-Fi Infrastructure Mode Setup Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet Printing a Network Connection Report Configuring Email Server Settings Changing or Updating Network Connections Wi-Fi Infrastructure Mode Setup You can set up your product to communicate with your computer using a wireless router or access point.
1 Epson product 2 Wireless router or access point 3 Computer with a wireless interface 4 Computer 5 Internet 6 Ethernet cable (used only for wired connection to the wireless router or access point) Selecting Wireless Network Settings from the Control Panel Parent topic: Wi-Fi or Wired Networking Selecting Wireless Network Settings from the Control Panel You can select or change wireless network settings using your product control panel.
You see a screen like this: 3. Select Wi-Fi (Recommended). 4. Select Start Setup or Change Settings. 5. Select Wi-Fi Setup Wizard. 6. Select the name of your wireless network or select Enter Manually to enter the name manually. Use the displayed keypad to enter your network name. 7. Select the Password field and enter your wireless password using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters. • To move the cursor, press the left or right arrows. • To change the case of letters, press . • To delete the previous character, press . • To enter numbers and symbols, press . • To enter a space, press . 8. Press OK when you finish entering your password. 9. Confirm the displayed network settings and select Start Setup to save them. 10.
Wi-Fi Direct Mode Setup You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point. In Wi-Fi Direct Mode, the product itself acts as a network access point for up to 4 devices.
You see a screen like this: 3. Select Wi-Fi Direct. 4. Scroll down and select Start Setup. 5. Select Start Setup again. You see a screen like this: 6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
7. Press the home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. Note: If you don't see the icon on the LCD screen, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
You see a screen like this: 3. Select Wi-Fi (Recommended). 4. Select Push Button Setup (WPS). 5. Follow the instructions on the LCD screen to complete WPS setup. 6. Press the home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.
You see a screen like this: 4. Select Network Settings. 5. Select Network Status. 6. Select Print Status Sheet. 7. Select Print. Examine the settings shown on the network status sheet to diagnose any problems you have. Parent topic: Wi-Fi or Wired Networking Printing a Network Connection Report You can print a network connection report to view solutions to any problems you may have using your product on a network. 1. Press the home button, if necessary. 2. Select Settings. 3. Select General Settings.
You see a screen like this: 4. Select Network Settings. 5. Select Connection Check. 6. Select Print Check Report. 7. Select Print. Examine the error codes and solutions shown on the network connection report.
Network Connection Report Codes and Messages Check the error codes and messages on the network connection report to solve problems you may encounter with network connections. The tables here list solutions to problems based on the error codes and messages that may appear on the top of the report. 1 Error code 2 Message Note: Error codes and messages listed here may not all apply to your product.
Error code and message Solution E2, E3, or E7 Check the following: No wireless network names (SSID) found. Confirm that the router/access point is turned on and the wireless network (SSID) is set up correctly. Contact your network administrator for assistance. • Make sure your router or access point is turned on, and is correctly connected to your computer or network device. • Turn off the router or access point, wait about 10 seconds, and turn it on again. No wireless network names (SSID) found.
Error code and message Solution E5 If the security on your router or access point is not one of the following types, change the type of security on your router or access point and reset your product's network settings. Security mode (e.g. WEP, WPA) does not match the current setting of the printer. Confirm security mode. Contact your network administrator for assistance.
Error code and message Solution E9 Make sure your computer or network device are turned on. Also make sure that you can access the internet and Confirm the connection and network setup other devices on the same network from the devices you of the PC or other device. Connection using are trying to connect to your product. the EpsonNet Setup is available. Contact your network administrator for assistance.
Error code and message Solution E12 Make sure other devices on the network are turned on and do the following: Confirm the following • Make sure the IP address, subnet mask, and default gateway addresses are correct, if you are entering them -Index of the security key/password is set to manually. the first number • Confirm that the subnet mask and default gateway -IP address, subnet mask, or default addresses for other devices are the same.
Network Environment Messages Message Solution The same SSID may be set on several access points. Check the settings on your router and other access points to make sure each one uses a different SSID. The Wi-Fi environment needs to be improved. Turn the wireless router off and then turn it on. If the connection does not improve, see the documentation for the wireless router. Move your product closer to your router or access point, and remove any obstacles between them.
You see a screen like this: 4. Select Network Settings. 5. Scroll down and select Advanced. 6. Select Email Server. 7. Select Server Settings.
8. Select one of the options shown above, then select the settings you want to use. Contact your email provider if necessary to confirm the authentication method for the email server. Note: You may need to try more than one authentication method, as some email providers have more than one way to access their servers. 9. Select Proceed to save your settings. 10. Select Close to exit. 11. Select Connection Check to verify the connection to the email server.
Setting name Available options Description Secure Connection None Selects the encryption protocol used by the email server. Used with the SMTP-AUTH or Off authentication methods. STARTTLS SSL/TLS Parent topic: Configuring Email Server Settings Changing or Updating Network Connections See these sections to change or update how your product connects to a network.
Changing a USB Connection to a Wi-Fi Connection If you have already connected your product to your computer using a USB connection, you can change to a Wi-Fi connection. 1. Disconnect the USB cable from your product. 2. Uninstall your product software. 3. Download and install your product software from the Epson website using the instructions on the Start Here sheet.
1. Do one of the following: • Windows: Uninstall your product software. • Mac: Go to the next step. 2. Download and install your product software from the Epson website using the instructions on the Start Here sheet. Parent topic: Changing or Updating Network Connections Related tasks Uninstalling Product Software - Windows Disabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection.
4. Select Change Settings. 5. Select Others. 6. Select Disable Wi-Fi. 7. Select Yes to disable Wi-Fi.
Loading Paper Before you print, load paper for the type of printing you will do. Note: Your product may look different from the illustrations in this guide, but the instructions are the same.
1. Pull out the paper cassette. 2. Slide the edge guides outward.
Note: If you are using legal-size paper or larger, press the button and extend the paper cassette. 3. Slide the front edge guide to your paper size.
4. Do one of the following: • Insert paper in the cassette with the glossy or printable side facedown and slide it against the front edge guide. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the rear of the cassette. • Insert up to 10 envelopes with the printable side facedown and flap edge left, as shown. Note: Load envelopes only in paper cassette 1.
• Load a sheet of loose-leaf or other paper with holes as shown. Note: Do not select automatic 2-sided printing for this type of paper and do not print over the holes. Select Letterhead or Preprinted as the paper type setting. 5. Slide the edge guides against the paper, but not too tightly. Note: Make sure the paper fits under the tabs on the edge guides.
6. Keep the cassette flat as you insert it. Note: The paper may slide forward slightly as you insert the cassette. This is normal. 7. If prompted by the product's LCD screen, select the size and type of the paper you loaded and select Close.
8. Extend the output tray and open its extension. Note: Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first and printable side facedown. • Make sure the paper is under the tabs on the edge guides and not sticking out from the rear end of the cassette. • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
Related references Paper Specifications Paper Loading Capacity See the table here for the loading capacity of the paper cassettes. Paper type Loading capacity Cassette 1 (upper cassette) Cassette 2 (lower cassette) (WF-3730/WF-4730 Series) Plain paper Copy paper High-quality plain paper Letterhead paper Recycled paper Colored paper Pre-printed paper Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]) size: Up to the line indicated by the triangle mark1 Half Letter (5.5 × 8.
1 Automatic and manual 2-sided printing supported; load up to 30 sheets for manual 2-sided printing 2 Manual 2-sided printing supported; load up to 30 sheets 3 Manual 2-sided printing supported; load 1 sheet at a time 4 If paper feeds incorrectly, or printing is uneven or smeared, load 1 sheet at a time.
Paper type Epson Presentation Paper Matte Size Double-sided Printing Capacity Auto Manual Letter (8.5 × 11 inches [216 × 279 mm]) and smaller — — No. 10 (4.1 × 9.
• Epson Premium Presentation Paper Matte Borderless Paper Sizes • 4 × 6 inches (102 × 152 mm) • 5 × 7 inches (127 × 178 mm) • 16:9 wide (4 × 7.1 inches [102 × 181 mm]) • A4 (8.3 × 11.7 inches [210 × 297 mm]) • Letter (8.5 × 11 inches [216 × 279 mm]) Parent topic: Loading Paper in the Cassette Compatible Epson Papers You can purchase genuine Epson ink, maintenance boxes, and paper at epson.com (U.S. sales), epson.ca (Canadian sales), or epson.com.jm (Caribbean sales).
Paper Type Size Part number Sheet count Epson Premium Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041808 40 S041727 100 16:9 wide (4 × 7.1 inches [102 × 181 mm]) S042109 20 5 × 7 inches (127 × 178 mm) S041464 20 8 × 10 inches (203 × 254 mm) S041465 20 Letter (8.
For this paper Select this paper Type or Media Type setting Pre-printed paper Preprinted High-quality plain paper High-quality plain paper Envelopes Envelope Epson Ultra Premium Photo Paper Glossy Ultra Premium Photo Paper Glossy Epson Premium Photo Paper Glossy Premium Photo Paper Glossy Epson Photo Paper Glossy Photo Paper Glossy Epson Premium Photo Paper Semi-gloss Premium Photo Paper Semi-Gloss Epson Presentation Paper Matte Premium Presentation Paper Matte Epson Premium Presentation P
You see a screen like this: 4. Select Paper Size. 5. Select the paper size you loaded. 6. Select Paper Type. 7. Select the paper type you loaded. 8. Select Favorite Paper Settings to choose from a list of commonly used paper settings. 9. Select to choose another paper source or exit. Paper Type Settings - Control Panel Parent topic: Loading Paper Paper Type Settings - Control Panel Select a Paper Type setting that matches the paper you loaded.
Paper type loaded Paper Type setting Colored paper Color Pre-printed paper Preprinted High-quality plain paper High Quality Plain Paper Envelopes Envelope Epson Ultra Premium Photo Paper Glossy Ultra Glossy Epson Premium Photo Paper Glossy Prem. Glossy Epson Photo Paper Glossy Glossy Epson Premium Photo Paper Semi-gloss Prem. Semi-Gloss Epson Presentation Paper Matte Prem.
3. Select one of these Auto Error Resolver options: • Turn on this setting to display a warning and print single-sided when a 2-sided printing error occurs, or to print only what the printer could process when a memory full error occurs. • Turn off this setting to display an error message and stop printing if an error occurs. 4. Select the Paper Source Settings options you want to use. 5. When you are finished, press the home button to exit.
1. Press the home button, if necessary. 2. Select Settings > General Settings > Printer Settings > Universal Print Settings. You see this screen: 3. Adjust the settings as necessary. 4. When you are finished, press the home button to exit. Universal Print Settings Options Parent topic: Loading Paper Universal Print Settings Options Select the universal print setting options you want to use for your print jobs.
Universal Print Settings option Available settings Description Check Paper Width On Off Select On to check the paper width before printing. This prevents printing beyond the edges of the paper when the paper size settings are incorrect, but may reduce the printing speed.
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the Scanner Glass You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
1. Open the document cover.
2. Place your original facedown on the scanner glass with the top facing into the corner. Slide the original to the edges of the indicated corner. Note: The edges of your original may be cropped by 0.06 inch (1.5 mm) from the edge of the scanner glass. Manually position your original away from the edges to prevent cropping. 3. Close the document cover gently to keep your original in place.
Placing Originals in the Automatic Document Feeder You can place single- or multi-page original documents in the Automatic Document Feeder (ADF). Make sure the originals meet the Automatic Document Feeder specifications before loading them. Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder. Caution: Do not place photographs or valuable artwork in the ADF.
2. Fan your stack of originals and tap them gently on a flat surface to even the edges. 3. Insert the originals into the ADF faceup and top-edge first. The ADF icon on the Copy, Scan, and Fax screens lights up.
4. Slide the ADF edge guide against the originals, but not too tightly. ADF Original Document Specifications Parent topic: Placing Originals on the Product Related topics Copying Faxing Scanning ADF Original Document Specifications You can load original documents that meet these specifications in the ADF.
Paper type Paper size Paper weight Loading capacity Plain paper Letter (8.5 × 11 inches [216 × 279 mm]) 17 to 24 lb (64 to 95 g/m²) Approximately 35 sheets (Legal size: 10 sheets) Legal (8.5 × 14 inches [216 × 356 mm]) A4 (8.3 × 11.7 inches [210 × 297 mm]) Caution: Do not load the following types of originals in the ADF, or they may be damaged or may damage the scanner.
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying Options Copying Documents or Photos You can copy documents or photos onto various sizes and types of paper, including Epson special papers. 1. Place your original document or photo on the scanner glass, or place multi-page documents in the ADF. 2. Load the paper you want to print on. 3. Press the home button, if necessary. 4.
6. Change any of the displayed settings as necessary. 7. Select Advanced Settings to view and change additional copy settings, if necessary. 8. Select Preview to preview your copy on the LCD screen. 9. Press the preset button to save your copy settings. 10. When you are ready to copy, press the Copy icon. Note: To cancel printing, select Cancel.
Advanced Settings Copying option Available settings Description Paper Setting Various sources Select the paper source that you want to use. If you select Auto, paper is fed automatically depending on the paper settings you selected for the paper sources.
Copying option Available settings Description ID Card Copy Off Select On to copy both sides of an ID card onto one side of a sheet of paper On Borderless Copy Off On Adjusts the amount to expand the original photo when printing borderless photos Standard Medium Minimum Parent topic: Copying 95
Printing from a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
Selecting Basic Print Settings - Windows Select the basic settings for the document or photo you want to print. 1. Open a photo or document for printing. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. If necessary, select your product name as the printer you want to use.
4. For the Paper Source setting (WF-3730/WF-4730 Series), select where you loaded the paper you want to print on. 5. Select the size of the paper you loaded as the Document Size setting. Note: You can also select the User-Defined setting to create a custom paper size. 6. If you are printing a borderless photo, select Borderless. You can click Settings to access additional options for borderless printing. Note: You must select a compatible borderless paper type and size to print without borders.
16. To reduce noise during printing when you select Plain Paper/Bright White Paper, select On in the Quiet Mode menu. Note: Enabling Quiet Mode may reduce printing speed.
Multi-Page Printing Options - Windows You can select any of the available options in the Multi-Page menu to set up your multi-page print job. 2-Up and 4-Up Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options. 2×1 Poster, 2×2 Poster, 3×3 Poster, 4×4 Poster Prints one image on multiple sheets of paper to create a larger poster. Click the Settings button to select image layout and guideline options.
You see this window: 3. Select the double-sided printing options you want to use. 4. Click OK to return to the Main tab.
5. Click the Print Density button. You see this window: 6. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 7. If necessary, select the Adjustments options you want to use. 8. Click OK to return to the Main tab. 9. Print a test copy of your double-sided document to test the selected settings. 10. Follow any instructions displayed on the screen during printing.
Double-sided Printing Options - Windows You can select any of the available options on the 2-Sided Printing Settings window to set up your double-sided print job. Binding Edge Options Select a setting that orients double-sided print binding in the desired direction. Binding Margin Options Select options that define a wider margin to allow for binding. Start Page Selects whether printing starts on the front or back page.
Selecting Additional Layout and Print Options - Windows You can select a variety of additional layout and printing options for your document or photo on the More Options tab. 1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded.
• Select Custom and click the Advanced button to manually adjust the color correction settings or turn off color management in your printer software. • Select Image Options to access additional settings for improving printed images. Note: You can also select Color Universal Print settings. 3.
Custom Color Correction Options - Windows You can select any of the available options in the Color Correction window to customize the image colors for your print job. Color Controls Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos.
ICM Lets you manage color using installed color printing profiles. No Color Adjustment Turns off color management in your printer software so you can manage color using only your application software. Parent topic: Selecting Additional Layout and Print Options - Windows Image Options and Additional Settings - Windows You can select any of the Image Options and Additional Settings to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen.
High Speed Speeds up printing but may reduce print quality. Mirror Image Flips the printed image left to right. Parent topic: Selecting Additional Layout and Print Options - Windows Header/Footer Settings - Windows You can select any of the Header/Footer Settings options to add headers or footers when you print. The items are available to print at the top or bottom of your pages, in either the left, right, or center of the page. Note: These settings are not saved with your document.
Selecting a Printing Preset - Windows For quick access to common groups of print settings, you can select a printing preset on the Main or More Options tab. Note: You can create your own preset by clicking the Add/Remove Presets button. 1. Click the Main or More Options tab. You see the available Printing Presets on the left: 2. Place your cursor over one of the Printing Presets to view its list of settings.
3. Click on a preset to change its settings, or use any of the available options on the screen to control your printing presets. 4. To choose a preset for printing, select it. 5. Click OK. Parent topic: Printing with Windows Selecting Extended Settings - Windows You can select additional settings that apply to all the print jobs you send to your product. 1. Access the Windows Desktop and right-click the icon for your product in the right side of the Windows taskbar, or click the up arrow and right-click .
4. Click the Extended Settings button. You see this window: 5. Select any of the extended settings to customize your print. 6. Click OK to close the Extended Settings window. 7. Click OK to close the printer software window. Extended Settings - Windows Parent topic: Printing with Windows Extended Settings - Windows You can select from these settings on the Extended Settings window. Enable EPSON Status Monitor 3 Enables product monitoring for ink and paper supplies and other issues.
Separator Page Before each document, prints a separator page containing the title, user, date, and time. Remove white borders Removes white margins that may appear when you print borderless photos. Always Spool RAW Datatype Increases print speed and may solve other printing problems. Page Rendering Mode Increases print speed when printing is extremely slow or the print head stops during printing.
You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Parent topic: Printing with Windows Locking Printer Settings - Windows Windows administrators can lock access to some printer settings to prevent unauthorized changes. 1. Do one of the following: • Windows 10: Click and select (Settings) > Devices > Printers & scanners. Select your product name and select Manage > Printer properties. • Windows 8.
• Windows Vista: Click and select Control Panel. Click Printer under Hardware and Sound, then right-click your product and select Properties. • Windows XP: Click Start and select Printers and Faxes. Right-click your product and select Properties. 2. Click the Optional Settings tab. Note: You can prevent access to the Optional Settings tab by changing the user or group permissions in the Security tab. 3. Click Driver Settings. You see this window: 4. Select the checkbox for each setting you want to lock.
Locked Setting Options Parent topic: Printing with Windows Locked Setting Options Select the options you want to use for any locked print settings.
Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default print settings. 1. Access the Windows Desktop and right-click the icon for your product in the right side of the Windows taskbar, or click the up arrow and right-click . 2. Select Printer Settings. You see the printer settings window: 3.
Changing the Language of the Printer Software Screens Parent topic: Printing with Windows Changing the Language of the Printer Software Screens You can change the language used on the Windows printer software screens. 1. Access the Windows Desktop and right-click the icon for your product in the right side of the Windows taskbar, or click the up arrow and right-click . 2. Select Printer Settings. You see the printer settings window. 3. Click the Maintenance tab. You see the maintenance options: 4.
5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software. You can change how often the software checks for updates or disable this feature. 1.
Printing on a Mac You can print with your product using any Mac printing program, as described in these sections. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website.
You see the expanded printer settings window for your product: Note: The print window may look different, depending on the Mac OS version and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing. 6. Select the page setup options: Paper Size and Orientation.
7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings or Printer Features from the pop-up menu.
9. Select the Paper Source you wish to print from. (WF-3730/WF-4730 Series) 10. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 11. Select the Print Quality setting you want to use. 12. Select any of the available print options.
Normal For everyday text and image printing. Fine For text and graphics with good quality and print speed. Best Quality For the best print quality, but the slowest print speed. Parent topic: Selecting Basic Print Settings - Mac Print Options - Mac You can select any of the print options to customize your print. Some options may be unavailable, depending on other settings you have chosen. Grayscale Prints text and graphics in black or shades of gray. Mirror Image Lets you flip the printed image horizontally.
select a custom setting to create a custom paper size, but the Quality setting will be limited to Normal. Note: You must select a compatible borderless paper type and size to print without borders. Check the borderless paper compatibility list for details. 2. Select the orientation of your document or photo as shown in the print window. Note: If you are printing an envelope, select the icon.
• To invert or flip the printed image, select the Reverse page orientation or Flip horizontally settings. Parent topic: Printing on a Mac Selecting Double-sided Printing Settings - Mac You can print on both sides of the paper by selecting Two-sided Printing Settings from the pop-up menu on the print window. Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network.
2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test the selected settings. 5. Follow any instructions displayed on the screen during printing.
Short-Edge binding Orients double-sided printed pages to be bound on the short edge of the paper. Print Density Sets the level of ink coverage for double-sided printing. Increased Ink Drying Time Sets the amount of time required for drying ink after printing on one side of the paper before printing the other side in double-sided printing.
Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options. Color Matching and Color Options - Mac Parent topic: Printing on a Mac Color Matching and Color Options - Mac You can select from these settings on the Color Matching and Color Options menus. Color Matching Settings EPSON Color Controls Lets you manage color using controls in your printer software or turn off color management.
Note: An ICC profile is required if color management is turned off. Parent topic: Managing Color - Mac Selecting Printing Preferences - Mac You can select printing preferences that apply to all the print jobs you send to your product. 1. In the Apple menu or the Dock, select System Preferences. 2. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. 3. Select Driver or Options. You see a screen like this: 4.
Printing Preferences - Mac You can select from these settings on the Options or Driver tab. Thick Paper and Envelopes Prevents ink from smearing when you print on envelopes or other thick paper. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Quiet Mode Lessens noise during printing when you select Plain Paper/Bright White Paper as the paper Type or Media Type setting.
Click Print at the bottom of the print window. Checking Print Status - Mac Parent topic: Printing on a Mac Checking Print Status - Mac During printing, you can view the progress of your print job, control printing, and check ink status. 1. Click the printer icon when it appears in the Dock.
You see the print status window: 2. Select the following options as necessary for your Mac OS version: • To cancel printing, click the print job and click • To pause a print job, click the print job and click paused print job and click or Delete. or Hold. To resume a print job, click the or Resume. • To pause printing for all queued print jobs, click Pause or Pause Printer. • To display other printer information, click Settings or Supply Levels.
Note: If you do not see a notification, check to see if a number appears in the status area at the lower-right corner of the screen. Click this number to open the notifications menu, then click Add to Cloud Print. • Open a web browser and enter chrome://devices in the address bar. Skip to step 4. • If you see a registration confirmation screen instead, click Register. 4. Click Add Device. 5. Click the Register button that appears next to your product. 6. Click Register on the confirmation screen.
Scanning You can scan your originals and save them as digital files. Starting a Scan Scanning in Epson Scan 2 Starting a Scan After placing your originals on your product for scanning, start scanning using one of these methods.
You see a screen like this: 5. Select one of the following Scan to options: • Network Folder/FTP saves your scan file to a pre-defined folder on a network computer or FTP server. To use this feature, you must first create a shared network folder or obtain the FTP site address, and optionally register the location to your product's contact list. • Email lets you send scanned files through a pre-configured email server. • Computer lets you scan to a connected computer using your saved scan settings.
Related tasks Using Epson Scan to Cloud Entering Characters on the LCD Screen Using Presets Related topics Setting Up and Scanning to a Network Folder or FTP Server Placing Originals on the Product Scanning to Email You can scan an original and email the scanned file using your product's control panel. You need to have a preconfigured email server before you can scan to email. You can either enter the email address directly on the product's control panel or select an address from the Contacts list.
4. Select Email. Note: If you have not configured an email server, you are prompted to setup the server. Select Proceed to open the server settings screen or select Done to continue. You see a screen like this: 5. Do one of the following: • Select Contacts and choose an email address from the Contacts list. • Select Keyboard to use the displayed keyboard to enter the address for the recipient and press OK. • Select History to choose an email address from your recent scan history. 6. Select Scan Settings.
Related tasks Configuring Email Server Settings Entering Characters on the LCD Screen Related topics Placing Originals on the Product Scanning to a Connected Computer You can scan an original and save it to a connected computer using your product's control panel. The computer must be connected using a USB cable or connected to the same network as your product. You can save the scanned file as a JPEG or PDF file, or attach it to an email.
4. Select Computer. You see a screen like this: 5. Select OK to close the information screen, if necessary. 6. Select Select a computer and choose one of the following options: • If your computer is connected to your product over a network, select a connected computer from the displayed list. (If the computer is not listed, select Search Again.) • If you computer is connected to your product using a USB cable, select USB Connection. 7.
Related tasks Changing Default Scan Job Settings Entering Characters on the LCD Screen Selecting the Date and Time Related topics Placing Originals on the Product Setting Up a WSD Port (Windows 7/Windows Vista) You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on Windows 10 and Windows 8.x).
Parent topic: Starting a Scan Using the Product Control Panel Control Panel Scanning Options Select the options you want to use for scanning. Note: Not all options or settings may be available, depending on the Scan to option selected.
Scan to setting Available options Description Scan Area Letter Select the page size for documents, then select the orientation of the original A4 Legal Half Letter Envelope #10 5×7 4×6 8 × 10 Original Type Auto Cropping Select for photos with dark edges Max Area Select for most photos Text Specifies the type of original you are scanning Text & Image Photo Density –4 to +4 Adjusts the lightness or darkness of scanned images.
Parent topic: Starting a Scan Using the Product Control Panel Setting Up and Scanning to a Network Folder or FTP Server Before you can scan to a network folder on your computer or on an FTP server, you need to create a shared folder and optionally register its location to your product's contact list. Select the links below as necessary to create and register the folder, and to scan to it over the network.
• Windows 7: Click , right-click Computer, and select Properties. Check the Computer Name listed for your computer on the System window. Note: The settings in these steps may vary, depending on your version of Windows. See Windows Help for details on your operating system. 2. If the computer's name uses any characters that are not alphanumeric (letters or numbers), do one of the following to change the computer's name: • Windows 10 or 8.x: Select Rename this PC and follow the on-screen prompts.
11. Select the Security tab and check that the Group or user names list at the top includes the current computer user and the administrators who can now access the folder. 12. Select the Sharing tab again and write down the Network Path listed under Network File and Folder Sharing at the top. This is the path you will register to your product contacts list so you can select it for network scanning. 13. Click OK or Close. Now you can register the path to the folder to your product contacts list.
Enter the folder path name for the Location setting in one of the following formats depending on the Communication Mode setting you selected: • SMB: \\host_name\folder • FTP: ftp://host_name/folder_name • For a network folder or FTP location with a password, select the User Name field and use the displayed keyboard to enter the user name. Then select the Password field and enter the password. • For an FTP location, enter the FTP server port number in the Port Number field.
6. Select Network Folder (SMB) or FTP as the Type setting. 7. Enter the following information for the contact: • Name: The name to display in your product's contact list. • Index Word: Enter a word to identify this entry when searching for it (up to 30 characters). This field is optional. • Save to: The network path to the shared folder. Enter the folder path name in one of the following formats depending on the Type setting you selected: • SMB: host_name\folder • FTP: host_name/folder_name • User Name and
2. Press the home button, if necessary. 3. Select Scan. You see a screen like this: 4. Select Network Folder/FTP. You see a screen like this: 5. Do one of the following: • Select Contacts and choose a saved location from the Contacts list.
• Select Keyboard, then select the Communication Mode field and select Network Folder (SMB) or FTP. Then select the Location field and enter the folder location, and press OK. Enter the folder path name for the Location setting in one of the following formats depending on the Communication Mode setting you selected: • SMB: \\host_name\folder • FTP: ftp://host_name/folder_name • For a network folder or FTP location with a password, select the User Name field and use the displayed keyboard to enter the user n
Changing Default Scan Job Settings You can view or change the default scan job settings your product uses when you scan to your computer. You do this using the Event Manager program. 1. Do one of the following to open Event Manager: • Windows 10: Click and select EPSON Software > Event Manager. • Windows 8.x: Navigate to the Apps screen and select Event Manager. • Windows (other versions): Click > Event Manager.
• Windows (other versions): Click > Epson Scan 2 > Epson Scan 2. or Start, and select All Programs or Programs. Select EPSON • Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2.
You see an Epson Scan 2 window like this: 152
Parent topic: Starting a Scan Starting a Scan from a Scanning Program You can start Epson Scan 2 from a TWAIN-compliant scanning program to select scan settings, scan, and open the scanned image in the program. Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the software described in this section.
You see an Epson Scan 2 window like this: 154
Parent topic: Starting a Scan Starting a Scan from a Smart Device You can start a scan from a smart device using the Epson iPrint app. You can save the scanned document to your device or a cloud service, e-mail it, or print it. Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the software described in this section.
You see this window: 156
2. Select the Document Source setting that matches where you placed your original. 3. Select the Document Size setting that matches the size of your original. You can select Customize to enter a custom size, if necessary. 4. Select the image type of your original and how you want it scanned as the Image Type setting. 5. Select the Resolution setting you want to use for your scan. 6. Click the Preview button. Epson Scan 2 previews your original and displays the results in the Epson Scan 2 window. 7.
13. Click Scan. The product scans your original and saves the scanned file in the location you specified. Additional Scanning Settings - Main Settings Tab Additional Scanning Settings - Advanced Settings Tab Saving Scanned Documents as a Searchable PDF Using Epson Scan 2 Image Format Options Scan Resolution Guidelines Parent topic: Scanning Additional Scanning Settings - Main Settings Tab You can select these additional scanning settings on the Epson Scan 2 Main Settings tab.
Color Enhance Enhances the shades of the color you select in the scanned image. This setting is available only if you select Grayscale or Black & White as the Image Type setting. Brightness Adjusts the overall lightness and darkness of the scanned image. Contrast Adjusts the difference between the light and dark areas of the overall scanned image. Gamma Adjusts the midtone density of the scanned image. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges.
6. Select Searchable PDF as the Image Format setting. 7. Select Options from the Image Format list. You see this window: 8. Select any of the options on the General tab. 9. Select the Text tab. 10. Make sure the language used in the document text is selected as the Text Language setting. 11. Click OK. 12. Confirm the File Name setting and select a Folder setting for your document. 13. Click Scan. The scanned image is saved as a searchable PDF.
Image Format Options You can select different image formats and related options. For details on available options, click the ? icon on the Epson Scan 2 Image Format Options window. Not all image formats have options. Bitmap (*.bmp) A standard image file format for most Windows programs. JPEG (*.jpg) An image format that lets you highly compress image data. However, the higher the compression, the lower the image quality. (The TIFF format is recommended when you need to modify or retouch your scanned image.
If you plan to enlarge a scanned image so you can print it at a larger size, you may need to increase the resolution from the default resolution set by Epson Scan 2. Follow these guidelines to determine the resolution setting you need: • You will scan the image at its original size but enlarge it later in an image-editing program. Increase the Epson Scan 2 Resolution setting in your scan. Increase the resolution by the same amount you will increase the image size to retain a high image quality.
Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data. Note: Your product may look different from the illustrations in this guide, but the instructions are the same.
1. Connect a phone cable to your telephone wall jack and to the LINE port on your product. Note: If you have a DSL or ISDN connection, you must connect the appropriate DSL filter, or ISDN terminal adapter or router to the wall jack to be able to use the line for faxing or voice calls using your product. Contact your DSL or ISDN provider for the necessary equipment.
2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product. 3. Connect a second phone cable to your telephone or answering machine and to the EXT port on your product.
Note: If you connect an answering machine and Receive Mode is set to Auto, set the number of rings before your product answers a call to a number that is higher than your answering machine's setting for the number of rings. Any phone or answering machine must be connected to the EXT port for your product to detect an incoming fax call when the phone is picked up. Epson cannot guarantee compatibility with VoIP, cable phone systems, or fiberoptic digital services such as FIOS.
2. Select Settings. 3. Select General Settings. 4. Scroll down and select Fax Settings. 5. Scroll down and select Fax Setting Wizard. The Fax Setting Wizard screen appears. 6. Select Proceed. 7. On the Fax Header screen, use the displayed keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. 8. On the Your Phone Number screen, use the displayed keypad to enter your fax number, up to 20 characters.
fax calls. Select the ring pattern assigned to fax calls in the Distinctive Ring Setting. If you select On or a ring pattern other than All, Receive Mode is automatically set to Auto. 10. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes and go to the next step. • If you did not connect an external telephone or answering machine, select No and go to step 12.
3. Select General Settings. 4. Scroll down and select Fax Settings. 5. Select Basic Settings. 6. Select Line Type. 7. Select PBX. You see a screen like this: 8. Set the switch to Use to activate the setting.
9. Select Access Code. 10. Use the displayed keypad to enter the access code, such as 9, and select OK. 11. Select OK to exit. Parent topic: Setting Up Basic Fax Features Setting the Number of Rings to Answer If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. The number of rings should be higher than the number of rings your answering machine is set to for answering a call. 1. Press the home button, if necessary. 2.
6. Select Rings to Answer. 7. Select the number of rings and select OK. Make sure to select a number higher than the number of rings your answering machine is set to for answering a call. Note: An answering machine picks up every call faster than the product, but the product can detect fax tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has started receiving the fax, then hang up the phone.
3. Select General Settings 4. Scroll down and select Fax Settings. You see a screen like this: 5. Select the group of settings you want to change.
Parent topic: Setting Up Fax Features Print Settings - Fax Set the print options you want to use for incoming faxes in the Receive Settings > Print Settings menu. Setting Options Description Auto Reduction On Select to reduce the size of large received faxes to fit on the paper size in the selected paper source. Off Select to print large incoming faxes at their original size on multiple sheets, if necessary.
Setting Options Description Print Suspend Time Off Select On to set a time period to stop automatic printing of faxes or reports and save received faxes in the product’s memory. (Make sure there is enough free memory before using this function.) On Time to Stop Time to Restart Quiet Mode On Select On to reduce noise during printing. (Printing speed may be reduced.
Setting Options Description Line Type PSTN Selects a standard phone line (Public Switched Telephone Network). PBX Selects Private Branch Exchange, the type of phone line used in office environments where an access code such as 9 must be used to call an outside line. Fax Header Select to enter the header information and your phone number for inclusion on outgoing faxes.
Setting Options Description Rejection Fax Various Lets you automatically reject faxes from blocked numbers, with blank headers, or from unrecognized contacts. Parent topic: Selecting Advanced Fax Settings Security Settings - Fax Set the security options you want to use for fax data. Setting Options Description Direct Dialing Restrictions Off Does not restrict dialed fax numbers. On Allows faxing only to numbers stored in the contacts list or history.
1. Do one of the following: • Windows 10: Click and select EPSON Software. • Windows 8.x: Navigate to the Apps screen. • Windows (other versions): Click or Start > Programs or All Programs > EPSON Software. 2. Select FAX Utility. The first time you use the FAX Utility, you see this introduction window: 3. Read about the FAX Utility and click Close at the bottom of the window.
You see this window: 4. Click Select Printer and follow the on-screen instructions to transfer your product's fax settings to the FAX Utility. Note: For detailed information, click Help or Open Online Help. Parent topic: Setting Up Fax Features Setting Up Fax Features Using the Fax Utility - Mac You can set up your fax header and select your fax settings using the FAX Utility for Mac.
1. In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select the FAX option for your product, and select Options & Supplies. Select Utility and select Open Printer Utility. 2. Double-click FAX Utility, if necessary. You see this window: 3. Select your FAX product in the Printer list. 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings.
Parent topic: Faxing Setting Up Contacts Using the Product Control Panel You can set up your contacts and contact groups using the control panel on your product. Creating a Contact Editing or Deleting a Contact Creating a Contact Group Editing or Deleting a Contact Group Parent topic: Setting Up Contacts and Contact Groups Related tasks Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac Creating a Contact You can create a list of contacts to save frequently used fax numbers.
You see a screen like this: 4. Press the Add Entry icon. 5. Select Add Contact. You see a screen like this: 6. Select the number you want to use for the contact you are adding. 7. Select the Contact field, use the displayed keyboard to enter the contact name (up to 30 characters), and press OK.
8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for an entry (up to 30 characters), and press OK. (This field is optional.) 9. Select the Fax Number field, and use the numeric keypad on the LCD screen or the buttons on the product to enter the fax number. You can enter up to 64 characters. Note: If necessary, enter an outside line access code (such as 9) at the beginning of the fax number.
You see a screen like this: 5. Do one of the following: • To delete the contact, select Delete and select Yes on the confirmation screen. • To edit the contact, select Edit, select the item you want to change, enter the correct information, and select OK. When you are finished editing, select OK. Parent topic: Setting Up Contacts Using the Product Control Panel Creating a Contact Group You can create a group of contacts so that you can easily send faxes to multiple recipients.
You see a screen like this: 3. Select Contacts 4. Press the Add Entry icon. 5. Select Add Group. You see a screen like this: 6. Select the number you want to use for the group you are adding.
7. Select the Group Name field, use the displayed keyboard to enter the group name (up to 30 characters), and press OK. 8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for a group (up to 30 characters), and press OK. (This field is optional.) 9. Select Contact(s) Added to the Group. You see your contacts list. 10. Select the number next to each contact you want to include in your group. A check mark appears next to each selected contact. 11. Select OK.
4. Select the icon next to the group you want to edit or delete. You see a screen like this: Note: If you want to delete the entire group, select Delete. 5. To edit the group, select Edit. 6. Select Contact(s) Added to the Group. You see a list of the contacts in your group. 7. To add or delete a contact, select the number next to it. 8. Select OK.
• Windows (other versions): Click or Start > Programs or All Programs > EPSON Software. 2. Select FAX Utility. The first time you use the FAX Utility, you see this introduction window: 3. Read about the FAX Utility and click Close at the bottom of the window.
You see this window: 4. To edit the contacts list on your product, click Contacts. 5. Do one of the following: • To edit a contact, select it in the list and click the • To delete a contact, select it in the list and click the icon. icon. 6. To import fax numbers from your Windows Address Book into the FAX Utility PC-FAX Phone Book, select Edit PC-FAX Phone Book.
You see this window: 7. Select File > Import From Windows Address Book. 8. Select the contacts you want to import and click OK. Note: For detailed information, select Help or Open Online Help. Parent topic: Setting Up Contacts and Contact Groups Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory.
You see this window: 3. Select your FAX product in the Printer list. 4. Select Speed Dial/Group Dial List.
5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group Dial, enter a name, select your desired fax numbers, and click OK. 7. Repeat the previous steps as necessary to add all your speed dial or group dial entries. 8.
Note: You can send a black-and-white fax to up to 100 contacts or 99 groups at a time, or send a color fax to one recipient at a time. If your recipient's fax machine does not print in color, your fax is automatically sent in black-and-white. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. You see a screen like this: 4. Do one of the following to select fax recipients: • Manually enter a fax number: Select Keypad and enter a fax number.
• Select from the sent fax history: Select Recent to display the sent fax history. Select a recipient from the list. Note: To delete entered recipients, select the Enter Recipient field, select the recipient you want to delete, and select Remove. 5. If you need to change any fax settings, select Fax Settings and select your settings. 6. If you want to preview your fax in black-and-white on the LCD, press the icon.
Fax Sending Options While sending a fax, you can select Fax Settings and select these options.
Setting Options Description Add Sender Information Off Outside of Image Lets you include a header, your phone number, or a destination list in the selected location on your outgoing faxes Inside of Image Transmission Report Print on Error Lets you select when to print transmission reports Print Do Not Print Parent topic: Sending Faxes from the Product Control Panel Sending a Fax at a Specified Time You can send a fax at a time of your choice.
4. Enter a fax number or select a number from the Contacts or Recent lists. 5. Select Fax Settings. 6. Select Send Fax Later. 7. Select On. 8. Select Time, use the displayed keypad on the LCD screen to enter your desired time, and select OK. 9. Select Send. Note: To cancel faxing, select Cancel. After scanning your originals, your product dials the number and sends the fax at the specified time. Note: If the product is turned off at the specified time, the fax is sent when it is powered on.
You see a window like this: 2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen. For more information about selecting fax print settings, click Help. 4. Select the Page Range as necessary. (Leave the Number of copies set to 1.) 5.
If you’re faxing for the first time, you see a window like this one: 6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information.
You see a window like this: 7. Enter the recipient's name and fax number or select a recipient from the phonebook, then click Next. Note: For detailed instructions on using the Epson FAX Utility, click Help. 8. Select a cover sheet and enter a subject and message, then click Next. 9. Click Send to transmit your fax. Parent topic: Sending Faxes Sending Faxes Using the Fax Utility - Mac You can send a fax from a Mac printing program using the FAX Utility.
2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. 5. Select the number of pages you are faxing as the Pages setting. Note: Leave the Copies setting set to 1. 6.
You see this window: 7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List. • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu.
You see this window: 9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax. Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product.
If you connected a telephone to your product so you can use the same phone line for faxes and voice calls, you can also set your product to receive faxes manually. This allows you to check for a fax tone using the telephone and press a button on your product to receive the fax. Make sure to load paper in your product and select your fax settings before receiving a fax. Note: If you run out of paper during fax printing, load more paper and press the button indicated on your product's LCD screen to continue.
6. Select Receive to start receiving the fax. 7. Hang up the telephone. Parent topic: Receiving Faxes Related references Basic Settings - Fax Related tasks Receiving Faxes Automatically Receiving a Fax by Polling You can use polling to receive a fax from another fax machine (such as a fax information service). Note: You cannot use polling to receive a fax from a fax information service that uses audio guidance. 1. Press the home button, if necessary. 2. Select Fax. You see a screen like this: 3.
6. Select Close. 7. Enter the fax number you expect to receive the fax from. Note: If direct dialing has been restricted, you can only select the number from the contact list or fax history. 8. Select Polling to start receiving the fax. Parent topic: Receiving Faxes Viewing a Fax on the LCD Screen (Using the Inbox) You can save received faxes in your product's memory and view them on the LCD screen. 1. Press the home button, if necessary. 2. Select Settings. 3. Select General Settings. 4.
6. Select Fax Output Settings. 7. Select Save to Inbox. 8. Set Save to Inbox to On. 9. Select Option When Memory is Full and choose an option. 10. Select Inbox Password Settings to set, change, or reset the password for the inbox. Note: You cannot set an Inbox password if you chose to print faxes when the inbox is full. 11. Press the 12. Select home button. . Enter the inbox password, if necessary. 13. Select the fax you want to view. You see the fax displayed on the screen. 14. Press the icon. 15.
Saving Faxes to an External USB Device You can save incoming faxes to an external USB device connected to your product. 1. Insert a supported external USB device into the product's USB port. 2. Press the home button, if necessary. 3. Select Settings > General Settings > Fax Settings > Receive Settings > Fax Output Settings. You see a screen like this: 4. Select Save to Memory Device 5. Select Yes to save the fax or Yes and Print to save and print the fax.
The first time you use the FAX Utility, you see this introduction window: 3. Read about the FAX Utility and click Close at the bottom of the window.
You see this window: 4. To save faxes received by your product on your computer, select Save received faxes on this computer. 5. Select the destination folder and other options, and click OK. You return to the FAX Utility window. 6. To receive notifications when received faxes arrive in the selected destination folder on your computer, select Notify me if new faxes exist in forwarding folders.
7. Select how often you want to be notified of received faxes and click OK. Note: For detailed information, click Help or Open Online Help. Parent topic: Receiving Faxes Checking Fax Status You can check the status of current fax jobs, or faxes that have been received or sent on the product control panel. 1. Select Fax. You see a screen like this: 2. Select the icon. 3. To check the history of faxes that have been sent, received, or saved, select Transmission Log and select the job you want to check.
Printing Fax Reports You can print several types of fax reports whenever necessary. You can also print the fax log printed automatically by turning on Fax Log Auto Print. 1. Press the home button, if necessary. 2. Select Fax. You see a screen like this: 3. Press the icon. 4. Select Fax Report. 5. Select the fax report you want to print. Fax Report Options Parent topic: Faxing Fax Report Options Select the fax report or list you want to print. Fax Log Prints the fax log automatically.
Report Format Selects the amount of information on fax reports.
Using External USB Devices with Your Product Follow the instructions here to work with an external USB device connected to your product. Connecting a USB Device Disconnecting a USB Device Viewing and Printing from the LCD Screen Transferring Files on a USB Device Connecting a USB Device Connect a USB device or its USB cable to the USB port on the front of the product. Note: Epson cannot guarantee the compatibility of your device. Make sure the files on the device are compatible with the product.
** If there are more than 999 files, the JPEGs will be displayed in groups. Parent topic: Connecting a USB Device Disconnecting a USB Device After you finish working with a USB device, follow these steps to remove it. 1. If your product is connected to your computer using a USB cable, do one of the following: • Windows: Open the My Computer, Computer, This PC, or Windows Explorer utility. Then right-click the name of your USB device (listed as a removable disk) and select Eject.
4. Do one of the following to select your photos: • In Tile View, select the thumbnail images of the photos you want to print. • In Single View, select the thumbnail image of the photo you want to print, then press the left or right arrow buttons to scroll through and select additional photos, or select Tile View to return to the thumbnail image view and select additional photos. • To select all photos, select the menu icon and select Select all photos. 5.
Parent topic: Viewing and Printing from the LCD Screen Related references Print Setting Options - Device Mode Print Setting Options - Device Mode Select the print settings you want to use when printing from a USB device. Note: Not all options or settings may be available, depending on the file format.
Print settings Available options Description Fix Photo Auto Automatically adjusts the brightness, contrast, and saturation of the photo based on the setting that is selected People Landscape Night Scene Fix Red-Eye Enhance Off Turns off automatic adjustments; see Note below On Automatically fixes the red-eye effect in photos Off Print Order Last Page on Top Select the order for printing multi-page TIFF files First Page on Top Note: Fix Photo uses a sophisticated face recognition technology to
3. Select General Settings. You see a screen like this: 4. Select Printer Settings. 5. Select Memory Device Interface. You see a screen like this: 6. Make sure Memory Device is set to Enable. 7. Select File Sharing.
8. Select the way your computer is connected to the product: either USB or Wi-Fi/Network. Parent topic: Transferring Files on a USB Device Transferring Files from a USB Device to Your Computer You can transfer files to and from a USB device inserted into the USB port on the front of your product and a computer connected to your product. Note: Do not transfer files to and from a USB device while you are printing from the device. 1. Make sure your product is connected to a computer. 2.
Replacing Ink Cartridges and Maintenance Boxes The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it. Note: The WF-3720/WF-3730 Series do not include a user-replaceable maintenance box. You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.
You see a screen like this: Note: The displayed ink and maintenance box levels are approximate. 2. For more information, select Print Supply Status Sheet.
You see this window: 2. Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3. To disable the low ink reminder, right-click the product icon in the Windows taskbar and select Monitoring Preferences.
You see this window: 4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. 6. Click OK.
Checking Cartridge and Maintenance Box Status - Mac You can check the status of your ink cartridges and maintenance box using a utility on your Mac. Note: The WF-3720/WF-3730 Series do not include a user-replaceable maintenance box. 1. In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. 2. Select EPSON Status Monitor. You see this window: 3.
• Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
Maintenance box part number: T67150 Note: The WF-3720/WF-3730 Series do not include a user-replaceable maintenance box. Note: For best printing results, use up a cartridge within 6 months of opening the package.
1. Turn on your product. • If an ink cartridge is expended, you see a message on the LCD screen. Note which cartridges need to be replaced and select To cancel errors > Yes, replace now. • If you are replacing a cartridge before you see a message on the LCD screen, press the home button if necessary, and select Maintenance > Ink Cartridge(s) Replacement > Next > Start . 2. Lift up the scanner unit until it clicks. Caution: Do not move the print head by hand; otherwise, you may damage your product.
3. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children.
4. Before opening the new cartridge package, shake it gently four or five times. Caution: Do not shake the cartridges after opening the packages, or ink may leak. 5. Remove the cartridge from the package. Caution: Do not touch the green chip on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print.
6. Remove the yellow tape from the cartridge. WF-3720/WF-3730 Series WF-4720/WF-4730 Series Caution: Do not remove any other labels or seals, or ink will leak.
7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Lower the scanner unit, and select Completed on the LCD screen if necessary. The print head moves to its home position and the printer starts charging the ink. This takes about 90 seconds. When you see a confirmation message on the screen, ink charging is finished. Caution: Never turn off the product while the power light is flashing or you will waste ink.
If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge. Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with the label facing up; do not store cartridges upside-down.
1. Click Cancel or Cancel Print to cancel your print job. Note: If the message screen appears on another computer on a network, you may need to cancel the print job using the product control panel. 2. Load plain paper or an envelope in your product. 3. Access the print settings in your print application. 4. Click the Main tab. 5. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 6. Select the Black/Grayscale checkbox. 7. Click OK. 8. Print your document.
5. Select Driver or Options. You see a screen like this: 6. Select On as the Permit temporary black printing setting. 7. Click OK. 8. Close the utility window. 9. Load plain paper or an envelope in your product. 10. Access the print settings in your print application. 11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document.
Conserving Low Black Ink with Windows The following window appears when black ink runs low and there is more color ink. Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings. To use this feature, Epson Status Monitor must be enabled. • Click Yes to use a mixture of color inks to create black, or No to continue using the remaining black ink for the document you are printing.
3. Press the tab on the maintenance box cover and remove it. 4. Grasp the maintenance box as shown and pull it out of its holder. Note: Do not tilt the used maintenance box or take it apart. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep the maintenance box out of the reach of children and do not drink the ink.
5. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. 6. Insert the new maintenance box into the holder and push it all the way in.
7. Press the tab on the maintenance box cover and reattach it.
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the software described in this section. You also cannot download and install any Epson product software from the Epson website for use with Windows 10 S; you must obtain software only from the Windows Store.
Checking the Nozzles Using the Product Control Panel You can check the print head nozzles using the control panel on your product. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the product. 3. Press the home button, if necessary. 4. Select Maintenance. You see a screen like this: 5. Select Print Head Nozzle Check.
You see a screen like this: 6. Select Start. The nozzle pattern prints. 7. Check the printed pattern to see if there are gaps in the lines.
WF-3720/WF-3730 Series Print head needs cleaning WF-4720/WF-4730 Series WF-3720/WF-3730 Series 8. Do one of the following: • If there are no gaps, select O. • If there are gaps or the pattern is faint, select X and continue. 9. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary. Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not be able to print.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing or longer if printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Checking the Nozzles Using a Computer Utility You can check the print head nozzles using a utility on your Windows or Mac computer. 1.
You see a window like this: 4. Click Print. 5. Check the printed pattern to see if there are gaps in the lines.
WF-3720/WF-3730 Series Print head needs cleaning WF-4720/WF-4730 Series WF-3720/WF-3730 Series 6. If there are no gaps, click Finish. If there are gaps or the pattern is faint, clean the print head.
Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head. Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it when a cartridge is low. You must replace the cartridge first.
5. Select Print Head Cleaning. You see a screen like this: 6. Select Start to clean the print head. When the cleaning cycle is finished, you see a message on the screen. Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not be able to print. 7. Select Check. 8. Select Print to confirm that the print head is clean. If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing or longer if printing.
2. Do one of the following: • Windows: Access the Windows Desktop and right-click the icon for your product in the right side of the Windows taskbar, or click the up arrow and right-click . • Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. 3. Select Head Cleaning. You see a window like this: 4. Click Start to begin the cleaning cycle.
5. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print. 6. Check the printed pattern to see if there are gaps in the lines.
WF-3720/WF-3730 Series • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
You see a screen like this: 5. Select Print Head Alignment . 6. Select one of the following options: • Ruled Line Alignment if vertical lines in your printout are misaligned. • Vertical Alignment if your printout is blurry. • Horizontal Alignment if your printout contains horizontal banding. 7. Follow the on-screen instructions to print an alignment sheet. Note: Do not cancel printing while you are printing head alignment patterns.
8. Check the printed patterns on the alignment sheet and select the following on the LCD screen, depending on the alignment pattern you printed: • Ruled Line Alignment: For patterns 1 and 2, select the number representing the pattern with the least misaligned vertical line. • Vertical Alignment: For patterns 1 through 4, select the number representing the pattern with the least amount of separation or overlap.
Related tasks Loading Paper in the Cassette Cleaning the Paper Guide If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. 1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this size: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 2. Select Settings. 3. Select Maintenance. You see a screen like this: 4. Scroll down and select Paper Guide Cleaning. 5.
Related tasks Loading Paper in the Cassette 254
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it. 1. Turn off the product. 2. Unplug the power cord. 3.
5. Open the document cover.
6. Clean the scanner glass and the glass area on the left with a soft, lint-free cloth (microfiber is recommended) moistened with a little glass cleaner. Caution: Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. 7. Close the document cover.
8. Open the ADF cover.
9. Use a soft, dry, lint-free cloth (microfiber is recommended) to clean the rollers and the interior of the ADF. 10. Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers. Parent topic: Cleaning and Transporting Your Product Transporting Your Product If you need to store your product or transport it a long distance, prepare it for transportation as described here.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help prevent the print head from drying out. Store your product in a cool, dry place. 1. Turn off the product. 2. Wait for the power light to go out, then unplug the power cable. 3. Disconnect any connected cables. 4. Remove all the paper from the product. 5. Close the output tray and paper support. 6. Remove any memory device inserted in the product. 7.
8. Secure the ink cartridge holder to the case with tape. 9. Lower the scanner unit. 10. Lower the control panel. 11. Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Keep the product level during transportation. Be sure to remove the tape from the ink cartridge holder before turning on your product. If print quality has declined when you print again, clean and align the print head.
Solving Problems Check these sections for solutions to problems you may have using your product.
LCD screen message Condition/solution Paper Setup Auto Display is set to Off. Some features may not be available. For details, see your documentation. AirPrint is not available when the Paper Setup Auto Display setting is disabled. Change the Paper Setup Auto Display setting to On. No dial tone is detected. Make sure the phone cable is connected correctly and the phone line works.
LCD screen message Condition/solution DNS error. Check DNS settings. A communication error during scanning to a shared folder over a network has occurred. Try the following: • Make sure the computer you are scanning to is turned on and not in sleep mode. • Temporarily disable the computer's firewall and security software, then try saving a scan over the network again. If successful, check your security software settings.
LCD screen message Condition/solution Communication error. Check the Wi- A wireless communication error during scanning to a shared Fi/network connection. folder over a network has occurred. Try the following: • Make sure the path to the shared folder matches the path registered to your product's contact list. • Make sure you enabled access rights to the shared folder in the folder Properties when you created the shared folder.
Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the home button, if necessary. 4. Select Maintenance. You see a screen like this: 5. Select Print Head Nozzle Check.
You see a screen like this: 6. Select Start. The nozzle pattern prints. 7. Do one of the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software.
Resetting Control Panel Defaults If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all. 1. Press the home button, if necessary. 2. Select Settings. 3. Scroll down and select Restore Default Settings. You see a screen like this: 4.
Solving Setup Problems Check these sections if you have problems while setting up your product. Product Does Not Turn On or Off Noise After Ink Installation Software Installation Problems Parent topic: Solving Problems Product Does Not Turn On or Off If you cannot turn the product on or off, try these solutions: • If you cannot turn on your product, make sure the power cord is securely connected and hold down the power button a little longer.
• In Windows, make sure your product is selected as the default printer and the correct port is shown in the printer properties. • If you see any error message or your software does not install correctly in Windows, you may not have software installation privileges. Contact your system administrator.
Network 5 GHz. See your router documentation or contact your internet service provider for instructions. • Verify that your router or access point is operating correctly by connecting to it from your computer or another device. • Print a network connection report and check the codes and messages on the report to help determine the cause of the problem. • You may need to disable the firewall and any anti-virus software on your wireless router or access point.
Related topics Wi-Fi or Wired Networking Network Software Cannot Find Product on a Network If EpsonNet Setup cannot find your product on a network, try these solutions: • Make sure your product is turned on and connected to your network. Verify connection using your product control panel. • Check if your network name (SSID) contains non-ASCII characters. Your product cannot display nonASCII characters.
Related concepts Uninstall Your Product Software Related tasks Printing a Network Connection Report Related topics Wi-Fi or Wired Networking Product Does Not Appear in Mac Printer Window If your product does not appear in the Mac printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again.
Cannot Print Over a Network If you cannot print over a network, try these solutions: • Make sure that your product is turned on. • Make sure you install your product's network software as described in your product documentation. • Print a network status sheet and verify that the network settings are correct. If the network status is Disconnected, check any cable connections and turn your product off and then on again.
• Check your wired LAN router or access point to see if the LED for the port to which your product is connected is on or flashing. If the link LED is off, try the following: • Make sure the Ethernet cable is securely connected to your product and to your router, access point, switch, or hub. • Try connecting your product to a different port or a different router, access point, switch, or hub. • Try connecting with a different Ethernet cable.
• If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution. • If network communication was interrupted while starting Epson Scan 2, exit Epson Scan 2, wait a few seconds, and restart it. If Epson Scan 2 cannot restart, turn off your product, turn it back on, and try restarting Epson Scan 2 again.
Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • If the nozzle check page does not print, but the product's power is on, make sure your product software is installed correctly. • Make sure your product is level (not tilted).
• Do not load originals above the arrow mark on the ADF edge guide. Parent topic: Solving Copying Problems Related references Document Jams in the Automatic Document Feeder ADF Original Document Specifications Related tasks Placing Originals in the Automatic Document Feeder Cleaning Your Product Solving Paper Problems Check these sections if you have problems using paper with your product.
Paper Ejection Problems Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • Make sure the paper cassette is inserted all the way in the printer. • If paper does not feed correctly, remove and reload it in the cassette and adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
2. Pull out the paper cassette. 3. Carefully remove any paper jammed inside the product. 4. Carefully follow all paper loading instructions and reload the paper.
5. Keep the cassette flat as you gently insert it. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Related references Paper Jam Problems in the Rear Cover Document Jams in the Automatic Document Feeder Related tasks Loading Paper in the Cassette Paper Jam Problems in the Rear Cover If paper has jammed in the rear cover, follow the steps here to clear the jam. 1.
3. Carefully remove any jammed paper from inside the product. 4. Carefully remove any jammed paper from the duplexer. 5. Close the rear cover. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
4. Carefully remove any jammed pages from beneath the ADF. 5. Close the ADF cover, then raise the document cover. 6. Carefully remove any jammed pages. 7. Lower the document cover. 8. Raise the ADF input tray and carefully remove any jammed pages. 9. Lower the ADF input tray. 10. Reload your originals. Caution: Make sure you do not load the ADF beyond its capacity for your paper size.
Parent topic: Solving Paper Problems Related references Paper Jam Problems in the Cassette Paper Jam Problems in the Rear Cover ADF Original Document Specifications Related tasks Placing Originals in the Automatic Document Feeder Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint.
Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your product is turned on and connected to your computer. • Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your product directly to your computer instead of the hub. • Make sure the printer status is not offline or pending. • Run a product check to see if a test page prints.
• Windows Vista: Click , select Control Panel, and click Printer under Hardware and Sound. Right-click your product name, select Printing Preferences, and select your product name again if necessary. • Windows XP: Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware, if necessary, and Printers and Faxes.) Right-click your product name, select Printing Preferences, and select your product name again if necessary. 2. Click the Maintenance tab. 3.
• Turn on any high speed settings in your product software. • Select a lower print quality setting. • Make sure the ink drying time has not been increased for double-sided printing. • Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress, and select the following settings: • Always Spool RAW Datatype • Page Rendering Mode • Print as Bitmap If printing is still slow and you are using Windows 7 or Windows Vista, try the following: 1.
Note: When printing using AirPrint, the available print settings are different from those covered in this manual. See the Apple website for details. Inverted Image Too Many Copies Print Blank Pages Print Incorrect Margins on Printout Incorrect Characters Print Incorrect Image Size or Position Slanted Printout Parent topic: Solving Problems Inverted Image If your printed image is inverted unexpectedly, try these solutions: • Turn off any mirror or inversion settings in your printing application.
• If a blank page exists in a document you are printing and you want to skip printing it, select the Skip Blank Page setting in your printer software, if available. • Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary. • Make sure your product is selected as the printer in your printing program.
Parent topic: Solving Page Layout and Content Problems Incorrect Image Size or Position If your printed image is the wrong size or in the wrong position, try these solutions: • Make sure you selected the correct paper size and layout settings in your printing program and printer software. • Make sure you selected the correct paper size on the control panel. • Make sure your paper is positioned correctly for feeding into the printer. • Clean the scanner glass and document cover.
Loading Paper in the Cassette Solving Print Quality Problems Check these sections if your printouts have problems with print quality, but your image looks fine on your computer screen. Note: When printing using AirPrint, the available print settings are different from those covered in this manual. See the Apple website for details.
Selecting Additional Layout and Print Options - Windows Selecting Printing Preferences - Mac Loading Paper in the Cassette Related topics Replacing Ink Cartridges and Maintenance Boxes Blurry or Smeared Printout If your printouts are blurry or smeared, try these solutions: • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. • Use a support sheet with special paper, or load special paper one sheet at a time.
Parent topic: Solving Print Quality Problems Related concepts Print Head Cleaning Related references Paper Specifications Compatible Epson Papers Related tasks Aligning the Print Head Using the Product Control Panel Selecting Double-sided Printing Settings - Windows Selecting Basic Print Settings - Windows Selecting Additional Layout and Print Options - Windows Faint Printout or Printout Has Gaps If your printouts are faint or have gaps, try these solutions: • Run a nozzle check to see if any of the print
Loading Paper in the Cassette Cleaning the Paper Guide Related topics Replacing Ink Cartridges and Maintenance Boxes Grainy Printout If your printouts are grainy, try these solutions: • Make sure you loaded the printable side of the paper correctly for your product. • Select a higher print quality setting and turn off any high speed settings in your product software. • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • Align the print head.
Selecting Basic Print Settings - Mac Selecting Printing Preferences - Mac Loading Paper in the Cassette Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the paper type setting matches the paper you loaded. • Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
Solving Scanning Problems Check these solutions if you have problems scanning with your product. Scanning Software Does Not Operate Correctly Cannot Start Epson Scan 2 Scanning is Slow Cannot Save a Scan to a Shared Folder Over a Network Parent topic: Solving Problems Scanning Software Does Not Operate Correctly If your scanning software does not operate correctly, try these solutions: • Make sure your computer has adequate memory and meets the system requirements for your operating system.
Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility. Make sure the correct product is selected. If necessary, select the Other tab and click Reset. Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson Scan 2 > Epson Scan 2 Utility. Make sure the correct product is selected. If necessary, select the Other tab and click Reset. Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility. Make sure the correct product is selected.
• If you registered the shared folder path to your product's control panel contact list or entered the path manually to scan, make sure you used the correct path. • Make sure the network folder does not already contain a file of the same name. If so, rename the file and try again. • If you still cannot scan to the shared folder, your network type may be set to Public. You cannot scan to a shared folder when using a public network. Follow the steps here to check and change your network type, if necessary.
This selects to a private network so you can save a scan to a shared folder; if you select No, you are using a public network and cannot save to a shared folder. Windows 7: 1. Click or press the Windows key on your keyboard. 2. Type Network and Sharing Center into the search field. 3. Under View your active networks, make sure Home network or Work network is selected. (If you need to change the network type, click the network type name.
Parent topic: Solving Scanned Image Quality Problems Related references Additional Scanning Settings - Advanced Settings Tab Line of Dots Appears in All Scanned Images If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass.
• If the Image Type setting is Black & White, select Text Enhancement. If the Image Type setting is Color or Grayscale, change the Text Enhancement setting to High. Parent topic: Solving Scanned Image Quality Problems Related references Additional Scanning Settings - Main Settings Tab Additional Scanning Settings - Advanced Settings Tab Image Colors are Patchy at the Edges If you are scanning a thick or warped original, cover its edges with paper to block external light as you scan it.
Ripple Patterns Appear in an Image You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused by interference from differing pitches in the scanner's screen and your original's halftone screen. To reduce this effect, adjust these Epson Scan 2 settings (if available) and try scanning again: • Select the Descreening setting. • Select a lower Resolution setting.
Solving Faxing Problems Check these solutions if you have problems faxing with your product.
• Make sure the error correction mode (ECM) setting is turned on if you are trying to send or receive a color fax. • If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to prevent disruption of incoming faxes. • If you have subscribed to a call forwarding service, the product may not be able to receive faxes. Contact your service provider for assistance.
Related tasks Connecting a Telephone or Answering Machine Using the Fax Setup Wizard Fax Memory Full Error Appears If you see an error message telling you that the product's fax memory is full, try these solutions: • If you set the product to save received faxes in the product's memory or inbox, delete any faxes you have already read. Note: Your product can store up to 100 faxes before its inbox is full. • If you set the product to save received faxes on a computer, turn on the selected computer.
• Clean the ADF. • Try changing the resolution or density setting on the control panel. • Try changing the original type setting on the control panel. • If you are sending a monochrome fax to a single recipient, try sending the fax using the Direct Send feature. Note: If you send a high-resolution monochrome fax without using the Direct Send feature, the product may automatically lower the resolution. • Try enabling the error correction mode (ECM) setting.
• Try reprinting the received fax. Parent topic: Solving Faxing Problems Related references Basic Settings - Fax Received Fax is Not Printed If a received fax is not printed, try these solutions: • Make sure the product is free of errors. The product cannot print received faxes if an error has occurred with the product, such as a paper jam. • If the product has been set to save received faxes in the product's memory or inbox, received faxes are not automatically printed.
Parent topic: Solving USB Device Problems Related references External USB Device Specifications USB Device File Specifications Related tasks Setting Up File Sharing for File Transfers from Your Computer Related topics Viewing and Printing from the LCD Screen Cannot Save Files on a USB Device If you cannot save files on a USB device connected to your product, try these solutions: • To save faxes on a USB device, create a folder in the Fax Output settings on the product control panel.
Parent topic: Solving USB Device Problems Related references External USB Device Specifications Related topics Transferring Files on a USB Device Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system.
4. Do one of the following to uninstall Epson Event Manager, then follow any on-screen instructions: • Windows 10/8.x: Select Epson Event Manager and click Uninstall. • Windows 7/Windows Vista: Open the Windows Control Panel utility. Select Programs and Features. (In Classic view, select Programs and click Uninstall a program.) Select Epson Event Manager and click Uninstall/Change. 5.
Note: If you uninstall the printer driver and your product name remains in the Print & Fax, Print & Scan, or Printers & Scanners window, select your product name and click the – (remove) icon to remove it. Parent topic: Uninstall Your Product Software Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life Epson products. Please go to this site (U.S) or this site (Canada) for information on how to return your Epson products for proper disposal.
• Windows Server 2008 • Windows Server 2003 R2 • Windows Server 2003 Note: For the latest product software available for your operating system, visit the Epson support site at epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean), select your product, and select Downloads. Parent topic: Technical Specifications Mac System Requirements To use your product and its software, your Mac should use one of these operating systems: • macOS 10.13.x • macOS 10.12.x • OS X 10.11.
Single-sheets Size A4 (8.3 × 11.7 inches [210 × 297 mm]) A6 (4.1 × 5.8 inches [105 × 148 mm]) Letter (8.5 × 11 inches [216 × 279 mm]) Legal (8.5 × 14 inches [216 × 356 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) 8 × 10 inches (203 × 254 mm) 3.5 × 5 inches (89 × 127 mm) 16:9 wide (4 × 7.1 inches [102 × 181 mm]) Half Letter (5.5 × 8.5 inches [140 × 216 mm]) Paper types Plain paper and paper distributed by Epson Weight 17 lb (64 g/m2) to 24 lb (90 g/m2) Envelopes Size No. 10 (4.1 × 9.
Single sheets 1 Top and sides: 0.12 inch (3 mm) 2 Reduced print quality area/top: 1.85 inch (47 mm) 3 Reduced print quality area/bottom: 1.77 inch (45 mm) Borderless 1 Reduced print quality area/top: 1.97 inch (50 mm) 2 Reduced print quality area/bottom: 1.
Envelopes 1 Sides: 0.12 inch (3 mm) 2 Top/bottom: 0.20 inch (5 mm) 3 Reduced print quality area/right: 0.71 inch (18 mm) 4 Reduced print quality area/left: 1.85 inch (47 mm) Parent topic: Technical Specifications Scanning Specifications Scanner type Flatbed, color Photoelectric device CIS Effective pixels 10200 × 14040 pixels at 1200 dpi Document size Maximum: 8.5 × 11.
Color depth Color: 48 bits per pixel internal (16 bits per pixel per color internal) 24 bits per pixel external (8 bits per pixel per color external) Grayscale: 16 bits per pixel internal 8 bits per pixel external Black and white: 16 bits per pixel internal 1 bit per pixel external Light source LED Parent topic: Technical Specifications Fax Specifications Fax type Black-and-white and color fax capability (ITU-T Super Group 3) Supported lines Standard analog (household) telephone lines PBX (Private B
Redial 2 times (with 1 minute intervals); specifications may differ by country or region Interface RJ-11 Phone Line RJ-11 Telephone set connection Parent topic: Technical Specifications Ink Cartridge Specifications Note: Your printer is designed to work only with genuine Epson-brand ink cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly or at all.
Related references Ink Cartridge and Maintenance Box Part Numbers Dimension Specifications Height WF-3720/WF-4720 Series: Stored: 9.8 inches (249 mm) Printing: 9.8 inches (249 mm) WF-3730/WF-4730 Series: Stored: 12.8 inches (324 mm) Printing: 12.8 inches (324 mm) Width WF-3720/WF-3730/WF-4720/WF-4730 Series: Stored: 16.7 inches (425 mm) Printing: 16.7 inches (425 mm) Depth WF-3720/WF-4720 Series: Stored: 14.9 inches (378 mm) Printing: 14.9 inches (378 mm) WF-3730/WF-4730 Series: Stored: 15.
Electrical Specifications Power supply voltage WF-3720 Series: 100 to 240 V WF-3730 Series: 100 to 120 V WF-4720 Series: 100 to 120 V WF-4730 Series: 100 to 120 V Rated frequency range 50 to 60 Hz Rated current WF-3720 Series: 0.5 to 0.3 A WF-3730 Series: 0.6 A WF-4720 Series: 0.6 A WF-4730 Series: 0.
Power consumption WF-3720 Series: Standalone copying: Approximately 15 W (ISO/IEC24712) Ready mode: Approximately 6.3 W Sleep mode: Approximately 1.2 W Power off mode: Approximately 0.2 W WF-3730 Series: Standalone copying: Approximately 15 W (ISO/IEC24712) Ready mode: Approximately 6.8 W Sleep mode: Approximately 1.2 W Power off mode: Approximately 0.2 W WF-4720 Series: Standalone copying: Approximately 15 W (ISO/IEC24712) Ready mode: Approximately 6.1 W Sleep mode: Approximately 1.
Humidity Operating: 20 to 80% RH (without condensation) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed USB for computer Hi-Speed USB (for external USB device) Note: Epson cannot guarantee the operation of externally connected devices.
Network Interface Specifications Wi-Fi Standards IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on purchase location Security WPA-PSK (AES); complies with WPA2 with support for WPA/WPA2 Personal WEP (64/128 bit) Frequency range 2.4 GHz Maximum Radio-Frequency Power Transmitted 19.8 dBm (EIRP) Coordination modes Infrastructure mode Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b Ethernet Standard IEEE802.
Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No. 60950-1 EMC: CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module: • Manufacturer: Askey Computer Corporation. • Type: WLU6320-D69 (RoHS) This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life Epson products. Please go to this site (U.S) or this site (Canada) for information on how to return your Epson products for proper disposal.
• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over. Be careful to keep the cord straight at each end. • If you use an extension cord with the product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating.
• Do not open the scanner section while the product is copying, printing, scanning, or performing any other functions. • Be careful not to trap your fingers when closing the document cover or scanner. • Except as specifically explained in your documentation, do not attempt to service or disassemble the product yourself.
• If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the product. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area. • Use an ink cartridge before the date printed on its package. • Do not dismantle an ink cartridge.
Telephone Equipment Safety Instructions When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: • Do not use the Epson product near water. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a telephone to report a gas leak in the vicinity of the leak. Caution: To reduce the risk of fire, use only a No.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line.
contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.
2. The Ringer Equivalence Number indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. CAN ICES-3(B)/NMB-3(B) Le présent produit est conforme aux spécifications techniques applicables d’Innovation, Sciences et Développement économique Canada.
memorializes a transaction in interstate commerce, and (c) this Section 1 shall survive termination of this Agreement. 1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc.
declaratory or injunctive relief only in favor of the individual party seeking relief and only to the extent necessary to provide relief warranted by that party's individual claim. In some instances, the costs of arbitration can exceed the costs of litigation and the right to discovery may be more limited in arbitration than in court. The arbitrator's award is binding and may be entered as a judgment in any court of competent jurisdiction. You may choose to engage in arbitration hearings by telephone.
1.7 Opt-out.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
Copyright © 1991-1997 Silicon Graphics, Inc.
