Start Here

ManualsBrandsEpson ManualsComputersWorkForce Pro WF-3730 All-in-One Inkjet Printer

Start Here

6 Lower the scanner unit.

7 If prompted, follow the instructions on the LCD screen.

The printer starts charging the ink. Ink charging takes

approximately 5 minutes. When you see a completion

message on the printer’s LCD screen, charging is

complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note:

• The printer is designed for use with Epson cartridges only, not

third-party cartridges or ink.

• The cartridges included with the printer are designed for

printer setup and not for resale. After some ink is used for

charging, the rest is available for printing.

• As part of setup, your product’s serial number will be sent to a

secure Epson server so that you can be eligible to participate

in programs we may offer from time to time, including the

Epson ink replenishment program. You will have a separate

opportunity to consent to participating in such programs.

Load paper

1 Make sure the product is done charging the ink, and then

close the control panel, lift the output tray, and pull out a

paper cassette.

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

IMPORTANT: Before using this product, make sure you read these

instructions and the safety instructions in the online User’s Guide.

The illustrations show the WF-3730, but the steps are the same

for all models, unless otherwise speciﬁed.

Note for Spanish speakers/Nota para hispanohablantes:

Para obtener instrucciones de conﬁguración en español, visite la página

de soporte de su producto en www.epson.com/support (EE.UU.) o

www.epson.ca/support (Canadá) y consulte la Guía de instalación

(requiere una conexión a Internet).

Important Safety Instructions: When using telephone equipment, you

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson

product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution: To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

Unpack

Note: Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Lift up the scanner unit until it locks and remove all

protective materials from inside the product.

3 Lower the scanner unit.

Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

2 Raise the control panel and turn on the product.

3 Select your language, country, and time on the LCD

screen.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

Install ink cartridges

Caution: Keep the ink cartridges out the reach of children and do not

drink the ink.

1 Lift up the scanner unit until it locks.

Caution: Do not touch the ﬂat, white cable.

2 Gently shake the ink cartridges.

3 Unpack the ink cartridges.

4 Remove only the yellow tape from each ink cartridge.

Caution: Do not remove any other labels or seals, or ink will leak.

Do not touch the green chip on the cartridge.

5 Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

WF-3730 Series

Summary of content (4 pages)

PAGE 1
WF-3730 Series 2 Start Here ift up the scanner unit until it locks and remove all L protective materials from inside the product. 3 Install ink cartridges 6 Lower the scanner unit. 7 I f prompted, follow the instructions on the LCD screen. The printer starts charging the ink. Ink charging takes approximately 5 minutes. When you see a completion message on the printer’s LCD screen, charging is complete. Caution: Keep the ink cartridges out the reach of children and do not drink the ink.
PAGE 2
WF-3730 Series 2 Start Here ift up the scanner unit until it locks and remove all L protective materials from inside the product. 3 Install ink cartridges 6 Lower the scanner unit. 7 I f prompted, follow the instructions on the LCD screen. The printer starts charging the ink. Ink charging takes approximately 5 minutes. When you see a completion message on the printer’s LCD screen, charging is complete. Caution: Keep the ink cartridges out the reach of children and do not drink the ink.
PAGE 3
Insert paper with the glossy or printable side down. 6 Install software Note: If you are using a Mac or your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software. To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.
PAGE 4
3 Insert paper with the glossy or printable side down. 6 Install software Note: If you are using a Mac or your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software. To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions. Note: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.